After the handset initialised successfully, an icon with the internal handset number and handset name appears on the phone screen. You need to register your handset to a base station if you want to use the basic functions of the DECT phone. You can register up to 10 handsets per base station. Press the Menu key (Round Button) when the phone is idle, and then select Settings > Audio > Ring Tones> Melodies Select the Desired Tone then press Save

Before you use your phone, you should take some time to get familiar with its features and user interface When you are in an active call, simply press Options > Hold to place a call on hold, and then select Resume to resume the call. Select the desired handset, and then press OK. The handset screen prompts you whether to deregister the handset.The W73P will allow you to register up to 10 users using the W73H handset per W70B base station. When using a RT30 Repeater, it also supports "Cascade mode" as well as "Star Mode". For full details on these modes, please see the Yealink DECT Repeater RT30 guide. After the handset is registered to the base station, you can use your handset to place an internal or external call. The Yealink RT30 DECT Repeater can be used with the W73P to extend the range of the DECT solution. All the usual handset functions are supported by the base station in the extended range.

You can enable DND to reject all incoming calls automatically when you do not want to be interrupted. The Yealink W73H is an extension telephone for Yealink W73P, extension terminal with charging base, mains connection and a compact and modern design. It only works if paired with a SIP base phone and perfectly compatible with Yealink W70B up to 10 handsets connected to the base. Simply press the Mute key during a call to mute the microphone, and then press the Mute key again to unmute the handset.You can locate a misplaced registered using the base station by pressing the button on the base station. You can answer a call when there is already an active call on your phone and you have Call Waiting enabled on the Horizon platform.