Champion Ceramics Bath Shower White Appliance Spray Paint

Product Information

The reason you need to sand (or ‘key’) your bath down before painting is to create a porous surface. This allows both the paint and the primer to adhere better. Use medium-rough sandpaper, working away until the surface of the bath feels rough to the touch. While this can be hard going, it will result in a longer-lasting, professional-looking finish. If you’re painting a cast-iron enamel tub, you’ll need to remove any traces of rust before you start sanding. You can do this easily with white spirit and an old cloth. Seal Door Gaps: Use weatherstripping or draft stoppers to seal gaps around the bathroom door to prevent fumes from escaping into other areas of the house.

Be bold!Whilst magnolia may look good on your new bath, we think that a pop of colour such as lemon or mint can give your bathroom that look you’ll love for years to come. Prep Work: Properly preparing the bathtub surface can take several hours or more. This includes cleaning the surface thoroughly, sanding down any rough spots, and applying a primer. Rustoleum tub and tile spray paint comes in a 12-ounce can and is available in coastal fog and white colors. The paint dries up in around 20 mins and leaves your tub with a porcelain-like and smooth, glossy finish that is waterproof. Below are the supplies you will need (remember, you may also include any other supplies and tools you deem necessary to carry out the process).The main disadvantage is that it is not durable, meaning you might need to repaint your tub more frequently.

We repair any damage such as chips in the bath, scratches , limescale, worn away enamel from hard water, if there are holes or damage at the bottom of the bath, we repair that also. You should also consider the type of environment the tub is in, as some paints may be more suitable for wet or humid conditions than others. Epoxy paint is more durable and resistant to water and chemicals, but it can be more difficult to apply and may have a strong smell. While at the store there were two options for this product, a spray on or a paint on. I figured that the spray would give the best finish, so that's what we went with, even though it was a bit more expensive. We bought two boxes knowing that we were doing the bathtub and the tile around the tub. (One box is supposed to be enough to cover one standard bathtub.) For a cast iron tub, the bath paint needed must be suitable for both metal and wood. An oil-based bath paint is the best choice, as well as an oil-based primer. Ensure the bath is clean and free of rust before you begin.Soap down the tub before scrubbing it with a cleanser, then finally scrub with a bleaching agent. Ensure you then rinse and wipe any residue using a thinner or acetone.