3M IEC C7 Figure of 8 Eight Mains Power Cable Lead - 3 Metre Long (Black)

Product Information

To have done this at no additional cost is all the more remarkable and I wanted to express my appreciation. This power cord is fully equipped with a 2-pin Europlug mains plug on one end and an IEC C7 socket on the other for connecting into a piece of equipment.

Appliance inlet: "part of the appliance coupler integrated as a part of an appliance or incorporated as a separate part in the appliance or equipment or intended to be fixed to it". for all my cables and they take about 3 weeks to deliver and never answer the phones or reply to e-mails.

Telephone headsets are a must for businesses large and small, increasing productivity and efficiency. In European countries the C15/C16 coupler has replaced and made obsolete the formerly common types of national appliance coupler in many applications. Australia and New Zealand AS/NZS 3112 (Type I) plug to IEC C7 figure 8 power lead constructed on H03VVH2-F 0. Secure packing was provided and total transit time by International Post was very quick; in fact the goods arrived in Australia within 7 days including a weekend which is quicker than the local Postal Service can deliver between the major Australian States. The general requirements for these items were incorporated into IEC 60320-1 and the standard sheets were moved to IEC 60320-3.

This cable assembly is terminated one end with a moulded Europlug (CEE 7/16) which is flat with two round pins.

Different types of connector (distinguished by shape and size) are specified for different combinations of current, temperature and earthing requirements. Cord set: "assembly consisting of one cable or cord fitted with one non-rewirable plug and one non-rewirable connector, intended for the connection of an electrical appliance or equipment to the electrical supply".

IEC 60320-1: General Requirements [1] specifies two- pole and two-pole with earth couplers intended for the connection of a mains supply cord to electrical appliances. A cord which is fitted with non-rewireable (usually moulded) connectors at both ends is termed a cord set.Commonly referred to as a "kettle cord" or "kettle lead", [17] [18] but kettles in countries using 120V require the C15/C16.