Information about Cisco’s environmental sustainability policies and initiatives for our products, solutions, operations, and extended operations or supply chain is provided in the “Environment Sustainability” section of Cisco’s Corporate Social Responsibility (CSR) Report. The Cisco 10GBASE-LR module supports a link length of 10 kilometers on standard Single-Mode Fiber (SMF) (G.652). SFP-10G-LR-S does not support FCoE. For the 40-Gb network module, you connect the two ports to form a paired set. For the 1/10-Gb network modules, you connect

Detailed data sheets are available at https://www.cisco.com/en/US/products/ps6576/index.html and https://www.cisco.com/en/US/products/hw/modules/ps5455/products_data_sheets_list.html. for the Firepower 2100 running ASA with FXOS. See the Cisco Firepower Compatibility Guide and the Cisco ASA Compatibility guide, whichThe Cisco 10GBASE-LRM Module also supports link lengths of 300m on standard Single-Mode Fiber (SMF,G.652). and 2140 have two SSD slots. These models ship with one 200-GB SSD installed in slot 1. See Product ID Numbers for a list of the PIDs associated with the 2100 series SSDs. The SSD drive identifiers are disk1 and disk2.

Cisco SFP-10G-SR transceivers are input/output devices that are hot-swappable. They are linked with a fiber optic network via a 10 Gigabit Ethernet port. Since these transceivers are MSA compliant and hot-swappable they can be plugged into any Cisco SFP+ based transceiver port directly. You won’t need to power them from the host network system for this. What this does is to make add-ons, moves, and exchanges fast and efficient. The Cisco 10GBASE-SR Module supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade Multimode Fiber (MMF). Using 2000MHz*km MMF (OM3), up to 300m link lengths are possible. Using 4700MHz*km MMF (OM4), up to 400m link lengths are possible. To begin with, 10G SFP+ optical transceivers are easily available in the market and are now a mature technology. They are not too expensive. 40G/100G optical modules are commonly used in data centres and enterprises around the world for interconnection. The 10G SFP+ modules have many different standards such as SFP-10G-LR, SFP-10G-SR, 10GBASE-LRM SFP+ and 10GBASE-ER SFP+. We have focused on the factors that separate SFP-10G-SR from SFP-10G-LR. The Cisco DWDM SFP modules enable enterprises and service providers to provide scalable, easy-to-deploy DWDM Fibre Channel services in their networks.

Documentation

When shorter distances of Single-Mode Fiber (SMF) are used, it might be necessary to insert an inline optical attenuator in the link to avoid overloading the receiver. A 10-dB inline optical attenuator should be inserted between the fiber-optic cable plant and the receiving port on the SFP at each end of the link whenever the fiber-optic cable span loss is less than 8 dB. The following figure shows the bicolor power supply LEDs on the power supply module. The figure shows the AC power supply

The 2110 and 2120 also have four fixed SFP (1 Gb) ports, and the 2130 and 2140 have four fixed SFP+ (1 Gb/10 Gb) ports. They The SFP-10G-ZR-I has a cold start at -40 ⁰ C, the transceiver will be operational except optical traffic is not supported from -40 ⁰ C to -28 ⁰ C, all other low speed features (DOM, I2C, etc.) are operational. The module is fully operational -28 ⁰ C to 85 ⁰ C. Each power supply has a separate power cord. Standard power cords or jumper power cords are available for connection to the The Cisco 10GBASE-SR Module supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade Multimode Fiber (MMF). Using 2000MHz *km MMF (OM3), up to 300m link lengths are possible. Using 4700MHz *km MMF (OM4), up to 400m link lengths are possible. The Firepower 2130 and 2140 have a removable fan tray with 3 + 1 redundant fans that are hot-swappable. The fan tray is installedUp to 24 Cisco 4-Gbps CWDM SFP Transceivers are supported in a single Cisco MDS 9000 Series switching module. The Firepower 2130 and 2140 contain one network module slot that provides optical or electrical network interfaces. Network The Cisco SFP-10G-ZR-I is a multirate 10GBASE-ZR, 10GBASE-ZW, and OTU2/OTU2e module for industrial operating temperature range. The SFP-10G-ZR-I has a limiting electrical interface receiver, which does not require EDC PHY on the host board, it can be plugged into any SFP+ port. It supports link lengths of up to 70 kilometers on standard Single-Mode Fiber (SMF, G.652), assuming a fiber chromatic dispersion of 20ps/(nm *km). This interface is not specified as part of the 10 Gigabit Ethernet standard and is instead built according to Cisco specifications. The SFP-10G-ZR-I has a cold start at -40⁰C; the transceiver will be operational except optical traffic is not supported from -40⁰ to -28⁰C, all other low speed features (DOM, I2C, etc.) are operational. The module is fully operational from -28⁰C to 85⁰C. Using customer use data, Cisco has identified and selected particular high-use wavelengths and will maintain shorter lead times on these items. The short-lead-time 4-Gbps DWDM SFP modules are from 1546.1 to 1560.6 with a 4-skip-1 approach. These part numbers are identified in Table 68. Table 69 identifies the rest of the 4-Gbps DWDM SFP modules. Cisco Dual Fiber 4-Channel OADMs (part numbers DS-CWDMOADM4A= and DS-CWDMOADM4B=): This device allows you to add and drop four channels (with different wavelengths) onto one direction of anoptical ring. The other wavelengths are passed through the OADM. Dual fiber is used for both network andSFP connections. The four wavelengths are set to 1470, 1490, 1510, and 1530 nm for DS‑CWDMOADM4A=, and to 1550, 1570, 1590, and 1610 nm for DS-CWDMOADM4B=.

The Cisco 10GBASE-ER Industrial Temperature Module supports a link length of up to 40 kilometers on standard Single-Mode Fiber (SMF, G.652). The SFP-10G-ER-I for Industrial Operating Temperature Range is a multirate 10GBASE-ER, 10GBASE-EW and OTU2/2e module. The Cisco UCS Virtual Interface Card (VIC) 15000 Series extends the network fabric directly to both servers and virtual machines so that a single connectivity mechanism can be used to connect both physical and virtual servers with the same level of visibility and control. Cisco ® VICs provide complete programmability of the Cisco UCS I/O infrastructure, with the number and type of I/O interfaces configurable on demand with a zero-touch model. The following figure shows the front panel of the Firepower 2110 and 2120. See Front Panel LEDs for a description of the LEDs. Cisco quality Identification (ID) feature enables a Cisco platform to identify whether the module is certified and tested by Cisco

A hardware classification engine provides support for advanced data center requirements, including stateless network offloads for VXLAN, NVGRE, and GENEVE. Additional features support low-latency kernel bypass for performance optimization through usNIC, DPDK, SR-IOV and server virtualization support using NetQueue and VMQ/VMMQ. The Cisco UCS VIC 15000 Series provide high network performance and low latency for the most demanding applications: shutdown is complete, the console displays It is safe to power off now. The front panel blue locator beacon LED lights up indicating the system is ready to be powered off. You can now move the The GLC-GE-DR-LX SFP also supports Digital Optical Monitoring (DOM) functions according to the industry-standard SFF-8472 Multisource Agreement (MSA). This feature gives the end user the ability to monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. The operating temperature range is 23 to 131°F (–5 to 55°C), and the storage temperature range is –40 to 185°F (–40 to 85°C).