Teltonika 4G-RUT240 Compact Industrial 4G LTE Router

Product Information

When various operations are executed on the device, the user must fully follow the safety instructions and recommendations provided with the device.

Note: this field becomes visible when 'Bridge interfaces' is set to on and 'Protocol' is set to PPPoE. You can see a quick video below that shows you how to find the reset to default settings button in the RUT240 menu.

This equipment complies with IC RSS‐102 radiation exposure limits set forth for an uncontrolled environment. If you want to use high voltage power supplies it is recommended to also use additional safety equipment to suppress voltage peaks from the power supply. Stable connectivity is ensured with WAN failover, while the RutOS software meets the highest security standards. Check Profile Scheduler Instance Example to get a better understanding at how Profile Scheduler Instances works. SSHFS is a tool, which allows you to mount a remote filesystem (in remote SSH server) to your RUT240 device using SSH.

Per version individual packages, as well as a zipped archive of all packages, can be downloaded here. The external antenna connectors make it possible to attach the required antennas and easily find the best signal location. contains many major updates, some of which made certain functionalities of RUT240 no longer available to utilize. The General Setup section is used to configure the protocol of an interface and all the different parameters that go along with each protocol.Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps. Any external antenna gain must meet RF exposure and maximum radiated output power limits of the applicable rule section. The UDP Broadcast Relay will listen for broadcast traffic on the specified port and relay that traffic to the specified interface(s).

The MAC Filter tab is used for setting up rules that allow or exclude devices with specified MAC addresses from connecting to your WiFi network. The full text of the EU declaration of conformity is available at the following internet address: https://wiki. DH parameters are used in symmetric encryption to protect and define how OpenSSL key exchange is performed. An Access Point Name (APN) is a gateway between a GSM, GPRS, 3G or 4G mobile network and another computer network. By default the device’s DHCP server will not start when it is connected to a network segment that already has a working DHCP server.NTPD includes the ability to use this to keep your clock in sync and will run more accurately than a clock on a device not running NTPD.