Nerf Elite 2.0 Motoblitz CS-10 Blaster, Motorised 10-Dart Blasting, Airblitz 6 Darts At Once, Clip, 22 Elite Darts, Multicolor, One Size

Product Information

However, this is done for six darts in total; given the relative inaccuracy of Elite darts compared to others, the wide nature of the fired darts makes up for the lack of velocity. Before we get started, any time you use a LiPo battery, LiPo batteries have specific use and care guidelines. Solder the positive and negative wires according to the diagram on the cage and route the wires through the wire traps on the cage and the shell. This entry was posted in Dart Blasters, Reviews and tagged 2022, blaster, blasterhub, elite, elite 2.

The top part is a semi-automatic clip-fed bullpup blaster, while the bottom part is an air-powered, multi-fire blaster, similar to older air system blasters.Flip it over and with a single drop of blue thread locker on each screw, install all four cage screws.

Depending on your preference, you can take it out completely with the rest of the wiring, or you can cut the wires off and use it as extra retention to hold the magazine in the magwell. If you're not interested in modding the “blitz” air blaster, you can skip this section and continue to reassembly. Once primed, dual blast buttons (one on each side, to account for righties and lefties) let the user press them to fire six Elite darts at once. By rejecting non-essential cookies, Reddit may still use certain cookies to ensure the proper functionality of our platform. Blast 6 darts at once with air pressurized airblitz action, or unleash 10 Nerf darts in a row with motorized blasting.Install the motors into the cage, aligning the red dot on each of the motors with the dots on the cage. Now for demolition, I'm using snips this entire video for demonstrative purposes, but a rotary tool like a Dremel can make quick work of the process (albeit with a bigger mess). Grinding or snipping out dart posts or air restrictors is likely to rupture the air tank and break what is a really neat part of the blaster, even in unmodded form. After the glue cools, press-fit your trigger extension into the existing rev trigger and test for smooth travel. Thread the XT-60 connector into the battery compartment and clamp the shell back together, making sure that both triggers still move freely as designed.

Load the 10-dart clip into the blaster and you're ready to go when you rev up the motor and pull the trigger.On the other side of the left shell is the battery tray, and nearly all of it needs to go to fit a LiPo.