A broken or worn drive belt is generally the cause of a drum that is failing to turn when the motor is functional. I found a blown up triac on the main circuit board and replaced it, but it was just the one that powered the courtesy light, whose bulb had blown, and fixing it didn't solve the heating problem (although I do wonder if its failure maybe led to the machine needing a reset in the first place). This can usually be found either on or behind the door frame, or behind the filter flap at the bottom of the appliance.

Beko Genuine Tumble Dryer Heater Element, Silver, (2970101500

If so, this replacement heater might just be what you need to get your tumble dryer back on the right track and have your laundry freshly warmed and comforting once more. Heating and cooling processes, tension, mineral deposits from hard water, and ageing can cause heater elements to deteriorate over time. I pressed/wiggled the reset button, lightly tapped the themostats with a screwdriver, wiggled connections, cleaned water tank, filters, condenser unit and then held the start button for a few seconds. Warning: Always unplug any appliance from the electricity supply before carrying out any work or testing on it.If you have already purchased the item then we will review, and where possible, refund the difference.

Beko 2970101500 Heater Element Unit Fits Beko DCU7230W/DSC64W

Her family are raising money for treatment to improve her quality of life and potentialy increase the length of her life. I eventually checked the live circuit board to confirm that the relays and drive transistors for the two heater elements were ok, and the microcontroller was never energising them. Important: Make sure your brand and model number is correct by using the "Check this part fits your appliance" box above.The element plays a key part in the functioning of your tumble dryer, as this is what provides the heat to ultimately dry your clothes. If an issue with temperature regulation is affecting the DC7110W dryer's performance, the thermostat is likely to be faulty - replacing this component should resolve the problem.

Beko Tumble Dryer Element - Beko Spares

SPOILER ALERT * The problem in my case was eventually solved simply by holding the Start button for ten seconds. We’ll talk you through how to successfully replace the heating element without damaging your tumble dryer. If your tumble dryer has not been adequately drying your clothes recently, you may have a problem with your dryer's heating element. No matter what issues you're facing with your Beko tumble dryer, our team of trained and experienced technicians is well-equipped to diagnose and resolve them for you.Here at eSpares, we have a wide-range of replacement tumble dryer heating elements for you to select from - so you can soon be on your way to repairing it yourself. To do this, move to delicate, turn on dryer and keep pressed down cancel button for about ten seconds release then all lights should flash when you press cancel again machine will go through test mode , then just turn machine off.

Beko Tumble Dryer Heater Element | Parts Centre Beko Tumble Dryer Heater Element | Parts Centre

All you need to do is clip the new one in place, reconnect the wires and place the connector back in and then screw it all up again.

If this is a persistent problem it will need an experienced repair technician to provide a solution. Model numbers usually consist of a manner of letters and numbers, and may also include characters such as a slash (/) or a dash (-). I tried to reset the thermal fuse (black button) built into the heater behind the guitar-shaped rear panel with a zillion screws, but it hadn't popped-out. The other thing to try is to measure the heating element for continuity, to ensure it is not fractured. A belt in working condition should be taut around the drum, so bear this mind when fitting a new one.