Also known as hanger bolts. A bolt with a wood thread at one end and a machined metric thread at the

Make sure that you do not move the second wood while tightening. You can take help of someone in case you find it difficult working on your own. So you just found out about dowel screws and you want to learn more about how to use them and their applications? Then you are in the right place!

Contact Value Fastener Today

A broader dowel is likely to break the board while a slimmer dowel will not hold the joints altogether.

The other big thing to keep in mind is the drill. Just like screws there are numerous of drills in the market with both broader and narrow ends. In conclusion, dowel screws are ideal for woodworking projects, while hanger bolts are needed when you want to connect something with a threaded insert to wood. Final Thoughts Now, the glue has finally dried and your work is almost done. The next thing to do is giving a final touch up to your work. Perfection is the only key which matters in millwork. Hone your perfection rather than falling for the traps. Pretty simple, isn’t it? Before diving into these steps deeper, let’s learn more about dowel screws and what are they used for. What are Dowel Screws?

The foremost thing to do is certainly the measurement. You should measure each and every minute detail before going for it. These are the few points you should remember before actually going on the task: How To Use Dowel Screws Size of the dowel screw Clean the mess caused by the drilling on the logwood. Make sure that everything is clean before gluing the screws.

If you have an experience with woodworking than you can even go for plastic dowels otherwise birch dowels are the best choice for beginners. Type of drillGenerally, the screw should not be more than half the width of the log. The shape of dowel is another issue along with size. Secure Dowel Screws - Squirt a bit ofwood glueinto the guide hole you just made. Insert a dowel screwdriver head in yourcordless screwdriver. Keep turning the dowel screw until the final edge of the thread disappears into the wood. Let the glue set completely. You can make use of paint, stain or polishes for the same. Spread the paint evenly on the surfaces and let it dry.