TP-Link 24-Port Gigabit Ethernet Switch, Rack-Mount/Desktop, Steel Case(TL-SG1024D)

Product Information

PWR-C1-1100WAC-UP and PWR-C1-715WAC-UP Platinum-rated power supply upgrade options are available to upgrade the default AC power supply to 1100W or 715W. Omada Wi-Fi 6 access points greatly improve experiences in high-density environments, and provides faster speed and greater range for more devices.

Flexible and dense uplink offerings with 100G, 40G, 25G, Multigigabit, 10G, and 1G modular uplinks. Cisco Catalyst 9300 Series switches run on Cisco IOS XE 16.5.1a release or later with the following exceptions. Catalyst 9300 Series 1G fiber models (C9300-xxS SKUs) are supported on Cisco IOS XE 16.11.1a release or later. Catalyst 9300 Series fixed uplink models (C9300L SKUs) are supported on Cisco IOS XE 16.11.1b release or later. These software releases includes all the features listed earlier in the Platform Benefits section. The HP 5130 EI Switch Series is comprised of Gigabit Ethernet switches that support static and RIP Layer 3 routing, diversified services, and IPv6 forwarding, as well as provide four 10-Gigabit Ethernet (10GbE) extended interfaces. Unique Intelligent Resilient Framework (IRF) technology creates a virtual fabric by managing several switches as one logical device, which increases network resilience, performance, and availability, while reducing operational complexity. Ideal for powering and connecting 802.11AX wireless access points, 4K/8K IP surveillance cameras, PoE lighting, and high power audio speakers, the GS524UP gives you a highly cost-effective and powerful switch with the best cost/PoE budget ratio.

These devices support SNMP versions 1, 2c and 3, allowing administration of these devices from a remote SNMP-based management platform. Even if an organization is not ready for SDN, OpenFlow support offers future-ready design for maximum investment protection On many switches, every port runs at the same speed. But there are a growing number of devices that offer multiple speeds on different ports. If you are only connecting a small set of devices, you will only need one speed – and it’s quite commonplace now to get 1 Gigabit speeds (1000 Mbps) even on small switches. Dedicated SFPs, not only providing fibre uplinks, but also uplink redundancy and failover, improving reliability and availability for network virtualisation Protocol-Independent Multicast (PIM) for IP multicast routing is supported, including PIM Sparse Mode (PIM SM), and Source-Specific Multicast (SSM).

Regardless of what your budget is or the size of your network, we have network switches that will fit your needs. You’ll find some smaller options meant for just a handful of network-connected devices to larger ones that have a huge amount of ports to accommodate large numbers of network-attached devices. We’ve collected options for just about every need. Layer 2, Routed Access (RIP, EIGRP Stub, OSPF - 1000 routes), PBR, PIM Stub Multicast (1000 routes)), PVLAN, VRRP, PBR, CDP, QoS, FHS, 802.1X, MACsec-128, CoPP, SXP, IP SLA Responder, SSO Internal power supply connector: The internal power supply is an auto-ranging unit. It supports input voltages between 100 (115 for 1100WAC) and 240 VAC. Use the supplied AC power cord to connect the AC power connector to an AC power outlet IEEE 802.1ba AV Bridging (AVB) built in to provide a better audio and video experience through improved time synchronization and QoS.Perpetual PoE: With Perpetual PoE, the PoE power is maintained during a switch reload. This is important for IoT endpoints such as PoE-powered lights, so that there is no disruption during switch reboot. ThousandEyes Enabled: End-to-end visualization of the path from campus/branch to clouds/DC with Cisco ThousandEyes Network and Application Synthetics (included with Cisco DNA Advantage licenses). ports supports PoE+ and PoE being able to provide up to 30W per port to any power-hungry device (PTZ Cameras, PoE Lights, PD Switches, Access Points)