Unlocked ZTE MF286D CAT 12 600mbps 4G+/LTE Home/Office Router (White). 2 x RJ11 Tel Ports. 2 x External Antennas. Works with any Mobile Network Sim Worldwide. 2.4/5GHz Wi-Fi + Bridge Mode (Renewed)

Product Information

Plus, you can also use the 4G Hub on the go, if you’d like. You can use this 4G router to get online anywhere in the UK, including while you’re on holiday, which is great. home/scl/ci/workspace/Soft4_MF286D_H3GSE_CPE/build_folder/qsdk/build_dir/target-arm_cortex-a7_uClibc-1.0.14_eabi/linux-ipq806x/zte_genl_kernel-1.0/zte_genl_kernel_main.c[201]: INFO:zte_http_redirect Tämän jälkeen ohjaudut mobiilireitittimen hallintasivulle. Kirjaudu sivulle käyttämällä salasanaasi. Salasana on reitittimen langattoman verkon (WLAN/ WiFi) salasana.

If you can't change the DNS to something like Cloudflare or Google, or whatever, and it works with a separate router then I guess the (if more untidy) solution is to continue with that 'fix'.

Just a couple of general OpenWrt queries. Can you disable the very unsecure WPS button? Can you totally disable WiFi? Bridge Mode does not work? You can only double NAT via DHCP for WAN port use? home/scl/ci/workspace/Soft4_MF286D_H3GSE_CPE/build_folder/qsdk/build_dir/target-arm_cortex-a7_uClibc-1.0.14_eabi/linux-ipq806x/zte_genl_kernel-1.0/zte_genl_kernel_main.c[173]: INFO:send msg to user ok, cmd=3, msg= The one issue with using 4G or 5G networks to get online at home is their latency is normally a lot worse than what you would get using fixed-line broadband. This means you might experience more lag than normal when playing online games. I suppose if this earlier image is correct then we can figure out which external antenna is bridged to which internal antenna which gives us an idea of identifying two of the internal. You don’t always get unlimited data with this device – there are a range of plans, including pay as you go contracts. The main downside to this MiFi device is it’s normally more expensive than a 4G Hub, and it can’t connect as many devices to the internet at once.

Have you experimented with other firmware? Was reading about it over here and recognised the name . bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. Looking online briefly, the ZTE router is Wi-Fi 5 only. Assuming 2x2 for 866MHz, I guess that's still fine but if you have a better router then you might benefit from the improvements of Wi-Fi 6 and other features. My Huawei LTE routers are pretty basic, so I assume ZTE, TCL and others are similar. UBIFS (ubi0:2): FS size: 18411520 bytes (17 MiB, 145 LEBs), journal size 1015809 bytes (0 MiB, 7 LEBs)

Although you can’t predict exactly what speeds you’ll get with the 4G Hub, Three has a good return policy, allowing you to test the device before committing to a 24 month contract.

Ongelma: Laite näyttää päällisin puolin olevan kunnossa ja laitteessa palaa kaikki valot, mutta internetyhteyttä ei ole NB** A user below stated that they ran into problems with this file and used a root_UImage from /Bin/UPDATE/ instead so I would recommend you use the file in the latter location** Use openwrt.org, point on firmware selector and then select "snapshot" and mf286d. At the moment fw is distributed as a snapshot without luci (gui). After next branchout (version 21.02.03) fw will be available with luci at once. Now to get where you need to for the upgrade power the zte board off and then on again and in the putty console window you'll see an option to cancel the kernel boot process in uboot by pressing escape, you have to be fast to catch this though so if you miss it power off and then try again. Now you should be at a uboot menu and this is where we need to be and where the things I did differ slightly to the very helpful guide on the link a few lines above.I'd be interested in trying openwrt on it, pawol seems to have done most of the work to make it fairly effortless experience. Indeed! My only issue is that the dual wan function is quite quirky and that’s what I initially bought it for. So what do I do? I either need to know how I can start firing commands at it in putty (it's set to 115200) so I can follow the rest of the Italian guide, or how can I use Framework to get to openwrt from here?

In July 2021, Three launched their new 4G Hub router in the UK. Also known as the ZTE MF286D, it’s a major upgrade on the old 4G Hub router (the Huawei B535) that was previously offered to 4G home broadband customers. In most games, we had a ping of about 20-30ms when connected to nearby servers. We did not notice any significant lag spikes or stuttering during our playtesting. ol_swap_wlan_memory_expansion: length:152475 size_left:152495 dma_size_left:262144 fw_temp:d5a69004 fw_entry_size:152499 An unusual feature is a removable battery with a capacity of 3000 mAh. It is a bit similar to the equipment for mobile 4G routers because you can take it anywhere and use it for at least 3 hours. It is a pity that instead of the USB charger, it has a 12-volt AC power adapter – you cannot power it with a power bank.ath5k, ath9k, ath10k, b43, b43 legacy, brcmfmac, brcmsmac, mt76, mwlwifi, rt2500pci, rt2800pci, rt2800usb, rtl819x, unknown, other Finally got some adapter cables to allow me to connect my external aerial directly to the inside connections. The two LTE SUB ants are probably the remainder MIMO connections (which is useful to know) and the Sub Ant is probably diversity.