Seagate BarraCuda, 2TB, Internal Hard Drive, 3.5 Inch, SATA 6GB/s, 7.200 RPM, 64MB Cache, for Computer Desktop PC, FFP (ST2000DM008)

Product Information

Locate the storage drive in the lower window. Disk 0 is usually the boot drive. Disk 1 or Disk 2 may be the additional storage drive. Windows Vista en nieuwerNative ondersteuning voor opstartschijven van 3 TB is alleen op UEFI BIOS-systemen en met gebruik van GPT-partities. Windows Vista en nieuwerNative ondersteuning voor niet-opstartschijven van 3 TB vindt plaats met GPT-partities, wat beschikbaar is op alle systemen. Then insert the Windows CD/DVD in the CD/DVD drive and then reboot the computer. You should be able to install Windows as if from scratch.

Confirm you are using the current SATA driver from the manufacturer of your SATA motherboard/controller.

Connect to an External Enclosure (Please verify if the enclosure is compatible with the hard drive). Access the BIOS by rebooting the computer and, while it is in the process of booting, before the Windows screen appears, press the key that will open the BIOS. This key will vary by computer make and model, but it is often Escape, Delete, F1, or F2. Consult your computer manufacturer if you are unable to enter the BIOS. The simplest way to reinstall the operating system (and probably erase the data, though that does not happen every time) is to insert the Windows CD/DVD in the CD/DVD drive and then reboot the computer. The option to repair Windows should appear as well as an option to reinstall Windows. Since the repair has failed, simply choose to reinstall Windows. If the drive successfully passes the diagnostics (but the Windows repair/recovery failed), then the drive itself is most probably safe to continue using. You should therefore, attempt to erase the drive and reinstall the operating system. Vereisten voor systeemgeheugen: 1 GB en hoger voor 32-bits systemen; 2 GB en hoger voor 64-bits systemen.

If your motherboard only supports SATA1 (1.5 Gbits/sec transfer rate) and you are installing a SATA2 (3.0 Gbits/sec) or SATA3 (6.0 Gbits/sec) drive, the motherboard may not detect the drive. There are four options in that case: See also Document ID: 196169 for more information on installing drives and Document ID: 188411 about the proper drivers in Windows. Before the drive can display in (My) Computer/This (PC) or Windows/File Explorer, it must be formatted in Windows. Please see the following articles for instructions:Each Seagate hard drive engages in regular self-tests, and most computers automatically run regular SMART tests on the hard drive(s) installed on them. SMART tests indicate whether a drive is approaching imminent failure. Thus, if a SMART error appears suddenly, it virtually always means, unfortunately, that the drive is about to fail and should be replaced. Het opstartproces is vertraagd op een computer waarin een grote harde schijf is geïnstalleerd en waarop Windows 7 of Windows Server 2008 R2 draait ST2000DM008 model, 18 months and it is dead.. stopped responding under system, wasn't even used heavy.. simple fkin storage for some random data.

Open the computer case and remove the data cable from the hard drive. This will stop any power saving commands from being sent.Once it is complete, it will most probably ask you to remove the CD/DVD and reboot the computer. Once this is done, you should be able to boot into Windows, and the install is complete.