The aim of this step is to create a nice smooth surface using the finest sandpaper you have in your kit, maybe a 400-600 grit. Once you’ve got it as smooth as possible, clean away any dust with a damp cloth and allow to dry. The aerosol contains an isocyanate activator providing the ultimate 2K performance from an aerosol, giving you the highest quality and performance possible. APPLICATION -- Designed to repair damages,scratches,slight dents and other damages to car wheel. Save your money and valued time. Remember, these kits are only designed to remedy minor damage, and even then there’s no guarantee the outcome will be satisfactory. Be sure to get a quote from your local, preapproved wheel repair specialists before you buy a kit, as you may decide the small extra cost is well worth to benefit from a professional wheel repair. A high-performance 1K matt lacquer gives a crystal matt lacquer finish. It can be applied over solvent-based basecoats and is ideal for smart repairs.

For best results we recommend that this kit and the components contained inside it are used inside in a warm garage, shed or workshop which is well ventilated and has a minimum temperature of about 55°F (13°C). Wet your sandpaper. This softens it, stops it clumping and reduces the risk of scratch marks. Keep rinsing it in more water as you work.

We recommend that you remove the wheel which needs repairing from the vehicle. However, it is not always necessary to do this but we have found it makes life easier. Please refer to vehicle manufacturer's handbook to ensure safe removal of the wheel. A genuine isocyanate 2K clear coat lacquer, offering a superior crystal clear finish that has excellent gloss retention and scratch resistance. This kit comes with filler, a paint pen, and other tools needed for easy application. It’s designed for steel and alloy wheels on all makes and models. This kit provides for a permanent solution that can: The Scratch Doctor’s Alloy Repair Kit is the professional and easy way to repair scuffs, scrapes and kerb damage on alloy wheel rims.

Repairing wheel damage can be a difficult job. There’s also no guarantee that your wheels won’t get scratched up again. If you take the time to repair your damaged wheels, it makes sense to apply RimSavers to your wheels.A technically advanced blending clear that dissolves the edges of clear coats and solid colours. Developed with SMART repairers in mind, and is 100% UV stable.

The dark compound came dried out near the tip and I needed to cut more than necessary. The cap did not fit as a result, and the kit squeezed out both compounds unevenly. The brush it came with does not paint smoothly so I’d recommend a better one.” Very satisfied with this product. It took about an hour to complete the process, and I didn’t need my husband to do this. I did it myself! Very pleased with my repaired rims!” The repair compound combines harmoniously with the aluminium of the wheel rims for a long-lasting restoration. Start by cleaning the wheel with washing up liquid. You need to remove all dirt and grease before you go any further. Easy to use, the Isopon alloy wheel kit can be sanded to a fine finish to achieve a tough, smooth repair that is ready to prime and paint.Easy to dry -- it only take about 10 minutes (Normal temperature) to dry , so when you finish the first layer , it will dry very fast , then you can paint second layer and third layer until the scratch is fully filled . save you lots of time A technically advanced adhesion promoter developed to offer excellent adhesion for ToughOX to virtually any substrate. It is fast drying with a very low film build up.

An outstanding all-purpose epoxy etch primer that provides excellent adhesion and corrosion prevention. It is very fast drying with excellent flow out. This 2K clear coat and hardener kit offers fast drying times with excellent flow out, ideal for coating both large and small surfaces. A kit containing 20 of the most popular wheel colour aerosols in a specially formulated OEM basecoat for the refurbishment of alloy wheels. Tip: Try wetting your sandpaper by rinsing it as you complete this step. Keeping it soft and moist can decrease scratch marks.A high-performance 1K lacquer clear coat, which gives a crystal clear finish that can be applied over all water and solvent-based basecoats.