276°
Posted 20 hours ago

SANSUN 2.4W LED MR11 Light Bulbs, Replacement for 12V 20W 35mm Halogens, Fiber Optics Christmas Tree Bulb, G4/GU4/GZ4 Bi-Pin Base, Soft White 3000K, (Pack of 4)

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

I’m considering changing our existing spots in the house to LED which are MR16 50W halogen bulbs connected in a series of 3 to an Aurora AU-150 transformer rated 50-150VA. We’ve got quite a lot of these throughout the house and if possible I’d like to avoid replacing these (due to the cost) with an LED driver equivalent. Would the existing transformer work with cool white 4000K LEDs? WWe don’t use dimmer switches at the moment but it would be a nice option – we have double switches at the moment. i’ve tried replacing my warm led spotlights with brighter led spotlights but they flash on and then go super dim. Can you help explain why that might be? Fortunately, upgrading Halogen MR16 light bulbs to LED is usually a painless affair, as most LED light bulbs are now designed to retrofit to existing light fittings. All you have to do to swap your old bulbs out is remove them from the light fixture and fit the new, shiny bulbs in their place.

Also I presume a reasonably competent (non-qualified) person can do this (taking appropriate precautions of course inc. turning off the mains supply). The G4 lamps are types of the bi-pin or two-pin standard, defined by the International Electrotechnical Commission (IEC). Spotlights are ‘directional’ bulbs that emit light in a focused beam. Halogen spotlights are a form of incandescent light bulb that use a tungsten filament and a mix of inert and halogen gases to produce light. The European Commission directive in September 2016 banned the manufacture of this type of power-hungry spotlights. If you’re replacing low voltage MR16 50W halogens that have low voltage 12V transformer, the first and obvious option is to replace it with something like an MR16LED. The retrofit lamps should work from your transformer. This can cause you to have to replace your transformer. Can I use 12V transformer for LED? The sale of higher energy bulbs was phased out in the UK in the last year. The sale of high energy fluorescent lightbulbs will be phased out by the government by September 23, 2023.

The G4 Bayonet Light is non dimmable and has a 2.5 watt light bulb. A warm white (3000K) light is very similar to a normal 20W halogen bulb and can be sufficiently bright. Can I replace gu5 3 halogen with LED? It’s important to note that the headlights are not the same as the ones in the picture. There are a number of advantages over halogens. They consume less power, do not heat up as much, and take up less space. According to XenonPro, you can’t just replace a bulb with an assembly. Can I replace halogen downlights with LED? I guess an alternative would be to fit new GU10 lamp holders with LED bulbs and ditch the transformers. Do you think thy is would be a better approach? The answer is no, they will not hurt your eyes. There is a concern about the blue light used in theLED bulb. It’s only a problem for people with existing eye conditions. The same amount of blue light is used by our phones, computers, and tablets. Are 8000k LED headlights legal? FAQ about 12V transformer and light emitting device compatibility. The cost of efficiency and extra power consumption are explored in the FAQ article. The ‘LED drivers’ are designed for DC light. What is the difference between halogen and LED?

When replacing Halogen MR16 light bulbs with LED bulbs, it’s important to use LED bulbs of equivalent wattage to your existing halogen light bulbs. This will ensure that the transformer can still handle the load safely. See also What is the LED equivalent of a 250 watt bulb? Can I swap halogen headlight bulbs for LED? They are brighter and produce a negligible amount of heat as compared to them. Moreover, the average life of a G4 LED capsuleis 30000 hours, which is ten times more than the halogen bulb. They have no toxic chemicals like mercury or Barium, thus posing no threat to human health.Down Lights in large-sized areas, Triple Cluster Fitting, Quad Cluster Fitting, Awning Lights with G4 plugs or a bulb type fitting and adding a G4 Converter. A term used to compare LED light bulbs with their incandescent alternatives. An LED light bulb with an equivalent wattage of 35W is a direct replacement for a 35W incandescent light bulb. This is different from a light bulb’s stated wattage ( see below). For example, if you have one 35W halogen installed in your kitchen, ensure you swap it for 35W equivalent LED. The actual wattage of the LED light bulb may vary, but the equivalent wattage must be the same as your current halogen bulbs. For example, you might find both 5W and 6W LED light bulbs that have an equivalent wattage of 35W; both of these would be fine to replace 35W halogen bulbs.

Down Lights in medium-sized areas, Multiple Down Lights in large areas, Triple Cluster Fitting, Quad Cluster Fitting. Most people will be able to recover the cost of a new light bulb within three months. Less trips to the store and up the ladder can be saved with the use of LEDs. It takes about 25,000 hours for them to finish. By comparison, compact fluorescents can last up to 8,000 hours. Can you switch from halogen to LED headlights? If you have low voltage halogen light bulbs installed with a transformer, the first thing you need to do before replacing Halogen MR16 light bulbs with MR16 LED bulbs is to find the transformer’s maximum load. You should be able to find this on the body of the transformer itself, in the form of a ‘VA’ number. This VA number will either be fixed, or it will be a range (e.g. 10-60VA).I have these transformers which have been attached since 2000, see photo below, can you please advise if I have made a mistake in choosing the correct bulbs for the job? In your outdoor lighting systems, you can often see halogen lighting. Flood light bulbs can be replaced with LEDs and last a long time. Can I replace 12V 50W halogen with LED?

At this point, it’s important to note that if it is a halogen transformer,this maximum load applies to halogen light bulbs only. For example, if you have a 40VA transformer for halogen bulbs, you should not install 40-watts worth of LED light bulbs. This would overload the fitting and potentially cause a safety issue. Saving money and the environment are the benefits of replacing halogen with a light emitting device. Is it worth replacing bulbs with LED? You would need a transformer to reduce the mains voltage down to 12 volts. There are two types of transformers available in the market. One is the electromagnetic transformer and the other is electronic. Electronic transformers are preferred due to their efficiency and low cost. #3 The compatibility Why Multi-Volt?Multi-Volt circuits are designed to ensure a consistent output voltage, this ensures the LEDs will illuminate safely and reliably within an input range from 10 to 30 volts DC. Our new Multi Volt G4 LED Discs can be safely connected to 12 or 24 volt DC battery systems without modification, providing better performance by automatically compensating for low or high battery outputs and or voltage drops caused by longer cable connections.

The Halogen bulbs give off a fixed color temperature and consume more power than the LEDs. The lm per watt ratio for LEDs is 80 to 100lm/W, compared to 16 to 24lm/W for halogens. This means that the lights use less energy. Is it worth replacing halogen with LED? These numbers tell you the maximum wattage that the transformer can carry. For example, a 40VA transformer can handle up to a 40-watt halogen light bulb, while a 10-60VA one can carry between 10 and 60 watts worth of bulbs. Some transformers might just carry one individual light bulb, while others might be able to carry several lower wattage light bulbs in a series. Down Lights in large-sized areas, Triple Cluster Fitting, Quad Cluster Fitting, 2 or more Awning Lights with G4 plugs or Converters. As most LED bulbs have a much lower wattage, for example 5W – this falls below the minimum rating that the transformer is designed for (20W). I have 2 gu4 halogen bulbs in my fireplace. I’ve tried to replace with two led bulbs. When I install the new led bulbs they dont work. If I leave one led bulb in and install 1 halogen bulb in the led light lights up. The halogen bulb does not.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment