Joined in 2023 
82 
63 About this deal
Keep in mind that using a dimmer switch will also damage your lights in the long term, and they will wear out faster.
It all comes down to the final condition of the unit, and you won’t have to worry about spending more money on the unit as long as you’re sitting on a valid warranty.
The Latest From TCP
How to install LED strip lights with a remote? Your strip lights may have a remote or be able to connect to a mobile app. The manufacturer will include instructions to guide you through connecting to your remote controller. How to connect the remote to LED strip lights? If your LED strip lights can be remote-controlled, the strips will need to be connected using a receiver between the LED tape and the driver. This will mean you can change colour temperatures or RGB colours with a remote or phone app. In this article, we will be discussing some common TCP lighting problems and how you can sort them out. How To Fix TCP Lighting Problems? On the other hand, if you’re using a dual-band router, the issue might be more related to the credentials being the same for the 5.0 GHz and the 2.4 GHz channels. Some owners don’t even change the name of these channels. First of all, you should open up your Alexa app and go to the skill options. From there, you should remove the TCP smart skill and reboot your mobile phone once.
LED Pro Line Strip Luminaire – 4′, 32W, 40K SKU: PSP4UZDA840K View Details View Spec Sheet Read more The heater runs in this way instead of turning off to avoid any risk of the heater accidentally being left on in Auto mode when the leaving the home because it looked to be turned off. Since the TCP LED+ Outdoor Festoon Light uses Bluetooth, I had to be within range of the lights to control them. I’d have preferred a Wi-Fi connection, since this would extend range and allow the lights to work via Alexa, Google Assistant and IFTTT. Bluetooth devices can be internet connected if a gateway is available, but TCP doesn’t sell such a device. As it stands, the only way to take smart control is when you’re in your own home. PerformanceLED strip lights are designed to make cutting easy, so all you will need is a pair of scissors. Either follow the cutting line (that sometimes also has a scissor icon on it) or cut between the pair of copper dots that show up at the end of each LED unit. Cutting anywhere else will potentially damage the circuitry and render your reel of lights useless. How to install waterproof LED strip lights? If you are installing your lighting outside or in a bathroom, you will want to make sure they are waterproof. Most LED strips have a casing to protect them from water and steam. It is best practice to ensure they have an IP rating of at least 65 to ensure they can hold up against splashes of water and that they will not damage the LED lighting underneath. So, to narrow down on these errors, just reach out to a professional. He will take care of the power connections for you, and you won’t have to get through this error yourself. One of the biggest appeals to LED strip lighting is its adaptability. By cutting strips you can continue your stream of light around corners. While it will depend on the brand you choose, most LED strips can be cut. Some will have a cutting line or scissor icon at each space where the lights can be safely cut without damaging the circuiting. These are generally earmarked by a pair of copper dots at the end of the LED. How Do You Cut Led Strip Lights?
On the other hand, having a professional install these units will help you secure a more consistent response. There is simply no point in wasting your time with a defective device, and you’ll be able to grab a fresh piece by seeking help from professionals. How to install LED strip lights in the kitchen? LED strip lights look most effective when the strip is hidden away and only the light shows through. This could be underneath shelves, cabinets or worktops for maximum effect. So, even if you’re using a dual-band router, there is a good chance that you’re only connecting to the 5.0 GHz network.How do you connect two or multiple LED strip lights together? One way to connect different strips together is to solder them with wires. They are designed to make this process as easy as possible.
Most of the time, the situations with these lights not turning on are more related to the hardware and not minor configurations.
Simplify Your Lighting Project with TCP
Most often than not, these issues are related to unstable voltage or a dimmer switch installed in your outlet. How to install LED strip lights in the shower? Make sure your bathroom is completely dry before you install strip lights into your shower. If the surface is wet, the adhesive will not take to the surface beneath it. Always use fully waterproof strips if they will be exposed to water regularly. However, if you’re not sure about the power connections in your home and don’t get them serviced every season, then now might be a good time to call an expert. However, if the lights are damaged, and you’re not sure about the hardware, then claim the warranty immediately. The warranty is valid for 12 months, and you can seek help from professionals to get a new one. Most of the time, the experience with these lights will be effortless but if you’re not too sure about the power status, then reaching out to a local electrician is a better idea.
Great Deal 
New Comment