There are 2 switches in place. 1 is for changing the beam from Flood to Throw, and the other is for turning the light on/off and changing output. Available modes: There is yet 1 more switch, and that one is for switching between flood and throw. The center LED is actually used separately from the LEDs on the edge of the flashlight. I like that idea to have this option. The single LED has a much longer runtime as well. But anyway, the flood/throw switch is located below the knob. It’s pretty easy to operate in the dark.

Three RGB color LEDs are uniformly distributed around the converging lens, making it suitable for use on any occasion. Lamp Type: 1 x Central spot CW LED / 6 x flood CW LEDs / 1 x red LED / 1 x green LED / 1 x blue LED White and RGB Light Combo]This flashlight is composed of 9 LEDs surrounding the center, enabling 200-7000 lumens at seven brightness levels; Three RGB color LEDs are uniformly distributed around the converging lens, making it suitable for use on any occasion Also, there are nice stretchy holster and lanyard availablefor the Marauder Mini. It can be taken hands-free. This is whyMarauder Mini is a good choice for the most powerful edc flashlight.

Gizchina News of the week

The proximity sensor is a safety feature. Some people complained about this, and I don’t really see a problem with this feature. Measurements were taken indoors at 5 meters with a professional Hagner E4-X Lux Meter. The Olight Marauder 2 was set to Throw mode (spot light). Mode

After quite a bit of trouble, trial, and error, I learned that you can actually turn off the proximity sensor. So I repeated the test, and these are the numbers. They are slightly lower than done by the ceiling bounce test. I still trust these more than the ceiling bounce test I did before. Mode For reference, here’s a baseline shot, with all the room lights off and almost nothing hitting the sensor. Also, here’s the light with the worst PWM I could find. I’m adding multiple timescales, so it’ll be easier to compare to the test light. Unfortunately, the PWM on this light is so bad that it doesn’t even work with my normal scale, which is 50 microseconds (50us). 10ms. 5ms. 2ms. 1ms. 0.5ms. 0.2ms.In a display faster than 0.2ms or so, the on/off cycle is more than one screen, so it’d just (very incorrectly) look like a flat line. I wrote more about this Ultrafire WF-602C flashlight and explained a little about PWM too. User Interface and OperationUnlike the Marauder 2, the Marauder Mini uses the signature magnetic charging system and also has a removable battery. The customised 6500 mAh 32650 lithium-ion battery is recharged inside the torch using the included MCC3 magnetic charging cable. Simply connect the magnet to the base of the torch and plug the USB end into a suitable USB adaptor (5 V 2 A recommended for fastest charging). The indicator light on the magnet will go red while charging is in progress and turn green once charging is complete after approximately 5 hours if the power supply is sufficient enough to support the 2 A output, otherwise the cable will output at a lower rate or 1 A or 1.5 A depending on the power supply. Here is the list with most of the high-power flashlights we reviewed in this category (Category: high-power soupcan sized flashlights). Flashlight (and Link) I can’t wait to talk about this flashlight. If you’re impressed with anything build by Lumintop, Fenix, Acebeam and the like, you will definitely be impressed with this one.

Three RGB colour LEDs are uniformly distributed around the converging lens, making it suitable for use on any occasion. Also above is the light beside my custom engraved TorchLAB BOSS 35, an 18350 light. I reviewed the aluminum version of that light in both 35 and 70 formats.It is compatible with Olight's MCC3 magnetic charging cable. It's convenient for charging. You don't have to worry about battery usage at any time, anywhere. It only takes about 4 hours from empty to full. The flashlight's body surface is covered with 270-degree silicone for a more comfortable and stable grip. With the hidden lanyard hole design, the device can be easily stored, carried, and used on a regular basis. Smaller in size but still powered like a beast, the Marauder mini is a must-have for search & rescue, hunters, and all outdoor enthusiasts. In Marauder mini, the Spot beam has been shaped in a circular pattern instead of a square compared to theMarauder 2. A red indicator LED will show when the light is running out of battery. Also, the output will decrease when the battery is running low. I also tested cooling, and the drop clearly shows a different between non-cooled vs cooled. Have a look at the L7 runtime below: Olight Marauder 2 alternatives High power flashlight competitors