Cisco Meraki MR44 WiFi 6 Indoor AP

Product Information

Due to the reasons stated above, please do notdowngrade the network with MR44 APs to 27.5/27.5.1 or lower firmware if they are being powered on by 802.3af (PoE) switch/power injector.

With the combination of cloud management, high performance hardware, multiple radios, and advanced software features, the MR44 makes an outstanding platform for the most demanding of uses—including high-density deployments and bandwidth or performance-intensive applications like voice and high-definition video. MR44 and Meraki Cloud Management Warning: Please ensure that MR44 is connected to an 802.3at-capable (PoE+) switch/powerinjector during the initial installation ORensure that the network the MR44 is added to is set to MR 27.6or newer firmware. WEP*, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 – Personal**, WPA3 – Enterprise**, WPA3 – Enhanced Open (OWE)** LITHIUM.SearchAutoCompleteToggle({"containerSelector":"#searchautocompletetoggle_3e0cbb85e7d018","enableAutoCompleteSelector":".search-autocomplete-toggle-link","enableAutocompleteSuccessEvent":"LITHIUM:ajaxSuccess:enableAutoComplete","disableAutoCompleteSelector":".lia-autocomplete-toggle-off","disableAutocompleteSuccessEvent":"LITHIUM:ajaxSuccess:disableAutoComplete","autoCompleteSelector":".lia-autocomplete-input"});Do not throw in the device with household waste. The technical equipment is subject to storage and disposal in accordance with the organization's disposal procedure. Using a client machine (e.g., a laptop), connect to the AP wirelessly (by associating to any SSID broadcast by the AP) or over a wired connection. Due to the reasons stated above, please do not downgrade the network with MR44 APs to 27.5/27.5.1 or lower firmware if they are being powered on by 802.3af (PoE) switch/power injector. The equipment is used in areas without exposure to harmful and dangerous production factors unless otherwise specified in the operational documentation and/or on the equipment labeling. Using the dashed lines on the mount cradle template as a guide, set the proper spacing of the T-rail clips on the T-rail.

LITHIUM.Auth.LOGIN_URL_TMPL = "/plugins/common/feature/saml/doauth/post?referer=https%3A%2F%2FREPLACE_TEXT";

Specifications:

and 40 MHz channels (802.11n); 20, 40, and 80 MHz channels (802.11ac Wave 2); 20, 40 and 80 MHz channels (802.11ax) Connect the power adapter or PoE. The radio and signal strength LEDs on the AP will turn solid green or blue once the access point boots up and detects the gateway. With support for features of 802.11ax (WiFi 6), the MR44 offers MU-MIMO and OFDMA for more efficient transmission to multiple clients. Especially suited to environments with numerous mobile devices, MU-MIMO enables multiple clients to receive data simultaneously. This increases the total network performance and improves the end user experience. This is because the default MR44 firmware image has support for the low-power mode, however, MR 27.5/27.5.1 or lower firmware does nothave low power mode support.Using 802.3af switch/powerinjector with MR44 set to 27.5/27.5.1 or lower firmware might result in unexpected behaviors including but not limited to reboots or degraded performance. If the Ethernet LED does not turn solid green or blue, you may have a bad port on the AP. If this is the case, the AP signal LEDs will continue to scan.