20pcs. of 104 Ceramic Capacitor 0.1uF 100nF Low Voltage DIP Ceramic Disc Capacitors

Product Information

The 100uf, 50v ceramic capacitor has a working voltage of 50 volts. It also has a tolerance range of ±20%, which means that the values may be anywhere between 40 and 60 v or between 80 and 120uf.

We can also ask the reverse: What is the capacitor code for a known capacity? Let's try with a capacitor with C = 1.24 µF:When the first two numbers are multiplied with the multiplier, the resulting value is the value of the capacitor in picofarads. If a capacitor is marked with 2A474J, the capacitance is decoded as described above, the two first signs is the voltage rating and can be decoded from the table given below here. 2A is a 100VDC rating according to the EIA (Electronic Industries Alliance) standard.

The conductor is formed by screen printing, which consists of applying a paste (the conductive element) onto the ceramic carrier and firing at a high temperature (around 800 degrees Celsius). If there is only two number, it means there is no multiplier, Then you just read the value of the first two numbers in picofarads.High voltage ceramic capacitors are typically used in circuit designs to withstand high voltages for a short duration. Capacitance values range from 0.1 pF to 10,000 pF and inductances from 1 to 10 µH. The 104 ceramic capacitor is the most commonly used capacitor in electronics. It is used in integrated circuits, ICs, and other devices. Applications of Ceramic Capacitor 104 are listed below.

Component manufacturers indicate tolerance with a letter code that refers to variances as small as +/- 0.5pF (indicated as A) up to -20/+80% (written as Z). The capacitor tolerance chart below shows some common tolerance letter codes: Finally, the leads are connected by soldering or wire-bonding to complete the electrical connections and to protect them from corrosion. Ceramic disk capacitors are manufactured in different shapes such as round, rectangular, cylindrical, and metalized chips. What is Ceramic Capacitor 104? Modern capacitors use the numerical markings we outlined above, but older capacitors employed a (now obsolete) color coding system. If you come across these capacitors, try looking up a capacitor color code guide like the one here to decipher the codes for capacitance, breakdown voltage, and other values. Other Capacitor Values However, when the capacitance is lower than 100 µF, we can usually find a 3-digit capacitor code that defines the value. The rule is simple: The first and second digits tell us about the capacity in pF (picofarads), while the third one is a multiplier factor (the power of 10) - for the number n, the capacitance is multiplied by 10ⁿ. It's just another way to use scientific notation to describe big numbers. The last digit is usually within the range of 0-6.

Every capacitor usually has two numbers that characterize it. These are its capacitance and voltage rating. The latter tells us the maximum voltage at which the element will still work correctly. The producers often write the capacity directly, so when you see a capacitor with 220 µF 25 V, it simply means that it has a capacity of 220 µF and works safely with voltages up to 25 V. High voltage capacitors are sometimes referred to as power capacitors. Like other high voltage capacitors, they are designed to withstand high voltages for short durations. They are used in applications where the capacitors are charged and discharged (or sometimes discharged only) at high voltages. Conclusion When Any capacitor has 104 printed- It has a multiplier of 4 (Third number of code ). 10 is multiplied by 10×10 4 =10000. Then its value is 10×10000= 100000PF Capacitor code table/chart

Ceramic Capacitor 104 is a ceramic capacitor with values ​​ranging from 1 pF to 220,000 F. Its maximum voltage is 50 V and its minimum voltage is 16 V. It has a negative temperature coefficient which means that as the temperature increases, its capacitance will decrease with a rate of 0.005%/cCelsius degree rise Ceramic Disc Capacitor 104 is a type of capacitor used in electronic devices to regulate voltage or power. Ceramic capacitors are constructed from a thin disk of ceramic material, which has a large surface area and a high dielectric constant. Here is a Table of Mostly Used Codes of Ceramic Capacitor and their unit conversion in Micro, Nano, and PicofaradThe first two numbers describe the value of the capacitor and the third number is the number of zeros in the multiplier. Q: How do I interpret a three-digit capacitor code value? A: In a three-digit capacitor code, the first two digits represent the significant figures, and the third digit represents the multiplier. To determine the capacitance, combine the first two digits and multiply them by 10 raised to the power of the third digit. For example, a code of “104” translates to 10 x 10 Therefore, a disk capacitor could be constructed that was smaller than electrolytic capacitors of similar capacitance. This was very attractive for applications requiring a very small capacitor. Ceramic disc capacitor markings In addition to this, it can be used as a coupling capacitor since a 100uf ceramic capacitor provides isolation between the input and output circuits of a device. What is a 100 nf ceramic capacitor?