High-intensity LEDs make it easy to read off switching state A or B, or both, even under high-power spots. So I’m really happy in the end with my Top 9 selection - which I feel may look scattershot, yet is fully representative of the breadth of German pedal-makers. All of the above are also well-known and Internationally traded brands, which is not necessarily the case with the previous country best 9 listings I’ve done. A: Absolutely! The switcher works passively and can handle all kinds of audio signals without distortion or loss, for weaker piezo signals as well as stronger line level signals. Your SGoS pedal receives in every mode. You don’t have to change the mode if you just want to receive program change commands.

Ok, ok, you’re a smart one. I will discuss the topic „impedance“ in another post, but here’s a short summary: The basic function of an ABY is to split an audio signal, such as the output of an electric guitar, sending it to two different destinations at once, and letting the user select between using one at a time, or both in tandem. If you already have more than one amp, an ABY can allow you to easily switch between them, or use them both at once in stereo, which not only sounds better than using a single amp, but also opens up a whole universe of creative effects possibilities.The LEHLE-Switches work with a microcontroller and an intelligent True-Bypass-Relay-Circuit with active pop noise suppression circuit. Thereby they switch the Lehle Little Dual II even faster than mechanical switches and in addition to that wear- and noise-free.

The third mode is the midi mode in which the SGoS pedals send pc messages to control external gear as well. This cookie stores user-like settings for the chat system provider, which are required for our online chat service. Trusted ShopsProbably one of the most discussed questions in forums and lots of (alternative facts) different opinions: “Do I need a buffer?” Although there are slight differences in the modes and midi numbers, the examples I give you here work for all the SGoS pedals ( D.LOOP SGoS, DUAL SGoS, 1at3 SGoS and 3at1 SGoS): “How can I remotely control my LEHLE SGoS pedal?“

And I guess this is also the result of this excursion into Dual Amping, Stereo, Phasing and its challenges: trust your ears. One of Germany's better known pedal-builders with a really substantial range of 14 Overdrive and Distortion Pedals - all excellent. I've come across these pedals quite a lot, but they're not really much in distribution in the UK (actually only at SoundsGreatMusic.com), so my exposure has been fairly limited. These are some very impressive compact and horizontal medium-enclosure pedals - most of which are well reviewed and really well built - all the compact pedals have 3-Band EQ, while the larger formats have a mix of amp-style, dual-channel-tone and 3-band EQ. I really need to audition a few more of these. If you have a D.LOOP or a 1at3 SGoS it’s the same concept: each new LED signals a change of shift in pc numbers in increments of 3. On top of that, it has a polarity reversal switch, which solves the phase cancellation problems that sometimes arise when two amplifiers of different make and model are being used simultaneously. Toss in an "always on" dedicated tuner output, and the Radial BigShot ABY is an ideal solution for players with dual amp rigs. The easy-action mushroom-shaped button characteristic of LEHLE products is mounted in the cover so that your foot pressure is transmitted indirectly via a spring. Thus the circuit board is not exposed to mechanical loads, making the Little Lehle III virtually indestructible and guaranteeing years of trouble-free switching.

Warranty Info

A: Yes, you get a balanced or unbalanced (mono-) signal from transformer-isolated output A when using a stereo (TRS) cable. This compact, functional ABY from EHX is ideal for the player with fairly basic switching needs, and not much room on their pedalboard. At around 4.5 inches long and 2.75 inches wide, the entirely passive Switchblade Plus is easy to work into a crowded pile of stompboxes. You compare your beloved straight-to-the-amp guitar signal to the signal sent through the board and you feel like all the money you spent into your board is blown away. No treble, the amp doesn’t respond the same and your gear’s muffled. If you are combining all these 3, level, time and pitch, you can create a beautiful hovering stereo sound. There are endless possibilities. But don’t use too much! The more amount of everything you are using, the more indirect your signal gets and you most likely get lost in space. The next day you want to visit a friend who’s living at the further end of the city. It’s still raining and again heavy traffic (I guess it’s in London). Since you’re a musician and your car’s still broke you need to go by foot.

In case the signal coming out of one amp is out of phase (meaning it starts not with a positive, but a negative amplitude), you simply can press the phase button at the LEHLE pedal and the phase is flipped by 180°. Now both signals are starting in the same direction (depending if you flipped the positive or negative one). “Dizzzzzzy“ No, basically not. As mentioned there are cheap buffers as a side effect of an active circuit. It’s possible that your signal won’t sound that warm but suddenly like plastic and artificial.

Transparent Stereo Amp Switcher/Signal Combiner

If your pedal is not true bypass, it means that the circuit’s still active although the pedal is inactive. If you notice any degradation to or more noise in your signal (pedal in the chain / pedal off the chain) you should think about a true bypass looper. Something like a LITTLE LEHLE II or a D.LOOP SGoS. Gear nerds can definitely lust after a Lehle. As I mentioned, the company is a true innovator in the switching world, with brilliant designs that integrate amp switching, effects loops, MIDI, and all sorts of other wonderful things, but they also make a relatively basic and very robust ABY called the Little Dual. I have an Allston Combo and a Tremulator made by Rob Lohr ofAllston Amps in Boston. The Allston Combo is a clean platform amp with a Master Volume that allows you dial in clean to overdriven sounds with Reverb. The Tremulator is a clean platform amp with Tremolo and Reverb with no master volume. Both amps are around 45w of great tone. But most of you love effects and “Oh, what’s this one here? I need this overdrive to complete my chain of 6 different overdrives!“. Suddenly your pedalboard has the size of an office table and (you guessed already) the cable length increased.