Joined in 2023 
82 
63 About this deal
Once this is done you're ready to record in Audacity, just like you would in the AmpliTube software. Again, most recording software can be setup in the same manner. Just look for these same settings ,which will usually be labeled with one of the following terms: No. macOS already allows for professional level audio control. That is why it is only offered on Windows. As I have covered in prior articles, to set your audio sampling on Android or iOS, simply select it in any of the recording apps that offer such an audio sampling selection (i.e. Auphonic, FiLMiC Pro, FV-5 Cinema) or use an app that uses 48 kHz exclusively, like the RØDE Reporter app. (Stay away from the native camera app or GarageBand, which only support 44.1 kHz, which is kryptonite for video production.)
However, when plugging my headphones into the Irig input I can clearly hear the audio coming from my Dj controller. In addition, this also applies when plugging my external speaker into the ‘THRU’ input using a 3.5mm to RAC cable Even though the Rig Pro Duo I/O does not have VU meters, it indeed has LED indicators to help use set the level properly. The lower multicolor LED on each channel is there for that purpose.While software can be a bit unpredictable, I can say that during the time I spent testing the Duo, I had zero compatibility issues and devoted no time at all to troubleshooting. My daughter got AmpliTube on PC with that free QR scan, she did some testing but failed. I will have to sit with her and dop the troubleshooting. It connects to both machines via the supplied cable. And both machines recognise the iRig because it appears in the Microphone options.
Indeed there's no doubting that IK Multimedia has an eye on just about every audio application with iRig Pro Duo I/O, both in and away from the studio. It comes with batteries (2 x AA) and Lightning, USB-C and USB-A cables so can be used with iOS or Android devices but will also draw power by USB for more flexible use with a Mac or PC (it can be powered by DC but the adapter for this is an optional extra). And overall, it boasts decent enough specs to capture good quality audio recordings for a lot of different situations including music production, live streaming plus audio for podcasts and videos. The context in which you play, record and perform will determine how much the portability factor will matter to you. To connect a maximum of two balanced microphones, which can be any combination of balanced XLR (with switchable 48-volt phantom power) and sends the signal(s) to the appropriate smartphone, tablet or conventional computer. You have individual gain control of each input, and each one is sent discreetly as 1 and 2 (Left and Right). Unlike the Saramonic SmartRig+, the iRig Pro Duo I/O does not offer any “mono” mode to combine and center the two input channels, which can be convenient for live broadcast or live-to-drive, when there is no time for any post production. However, even though the iRig Pro Duo I/O does not offer a “mono” mode, this can be achieved using inexpensive third party software (at least with macOS and Windows), so this is not a dealbreaker even if you need this functionality. I have personally used such software for macOS. Battery Life (Recording- Max load*): 3 hours, 30 minutes (NiMH rechargeable); 45 minutes (Alkaline)As I have covered in many past articles, we record at the conservative -12 dB for a raw recording, to leave headroom for unexpected loud sounds like laughter or screams. In my test recordings which you’ll hear ahead, I set the input potentiometer to 90% to reach -12 dB with my normal voice level close to the mic. Fortunately, the preamps sound quite clean even at 90%. Included software: Cubasis LE, DSPMixFX software, REV-X reverb, Channel Strip, Guitar Amp Classics FX System requirements: iOS 7.0, iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPad Pro 10.5-inch, iPad Pro 12.9-inch (2nd generation), iPad Pro 9.7-inch, iPad Pro 12.9-inch (1st generation), iPad Air 2, iPad Air, iPad mini 4, iPad mini 3, iPad mini 2, iPad (6th generation), iPad (5th generation), iPod touch (6th generation), from Android 5 on devices with USB digital audio functions, from Win7, from Mac OS X 10.6 I connected a dynamic microphone to input 1 (Left), the headless Samson Q2U with the enormous Shure A81WS presidential windscreen ( reviewed here, shown below). The PSU is great to get around always needing batteries, especially if you are not being mobile with the unit.
The iRig Pro Duo, while portable, isn't exclusively for those on-the-go (can hold its own in all recording environments) The iRig ASIO drivers enable professional level audio control over your iRig hardware. With the iRig ASIO drivers, it allows for adjustable buffer sizes and optimal control for ultra low level latency. Overall, performance with ASIO is better and much more stable, resulting in less dropouts and audio processing issues. The two XLR inputs are also combo, so they accept unbalanced instrument-level sources via TS 1/4”. Can I connect an unbalanced electret condenser microphone too?Been talking to Support and they say the USB-C cable you supply with the iRig no longer works in the new iPads. Wish I'd been told this sooner! :
Related:
Great Deal 
New Comment