Joined in 2023 
82 
63 About this deal
What makes the Incra 1000HD different is that it’s HIGH DEFINITION! If you look at the protractor head you’ll see more teeth than my new puppy Abby. That’s 180 positive stops. Yeah that’s right. A stop for every degree including 90 in both directions. And it has 1/10 of a degree resolution thanks to the vernier cursor. Flip Fences can be used with any INCRA Miter Gauge and the Flip Shop Stop. Flip Fences are NOT compatible with the standard Shop Stop. As shown, the same INCRA HoldDown Clamp also keeps your fingers comfortably away from the blade when cutting workpieces that are too small to safely hold by hand. INCRA's Miter Express offers any miter gauge owner the safest and most accurate cross-cutting platform available. Miter gauge & fence sold separately; use the Miter Express with ANY standard miter gauge! Available for traditional 3/4” x 3/8” miter slots and Shopsmith machines. Shown above with an optional INCRA Miter 1000SE mounted and ready, the Express features 2 embedded T-Slot channels to secure the included Hold Down Clamp and Outboard Fence Support. These slots are also invaluable for mounting your own custom Jigs and Fixtures.
Whether it's your basic 90° cut-off, simple picture frames, or a 20-sided object, the Miter1000SE byINCRA delivers perfect, repeatable accuracy.First time, Every time, Any angle. Miter gauges don’t offer control or accuracy when pulled beyond the front of the saw, while the 5000 can crosscut 23" x 34" plywood cabinet sides with ease on most full size 10" table saws. The Incra MITER1000 SE features a 3/4" x 3/8” steel miter bar with up to six expandable nylon rings to achieve an absolutely perfect fit in any standard miter gauge slot. Six expansion disks adjust both sides of the bar for ZERO side play, low-friction travel on all table saws with standard miter gauge channels, including Delta, Craftsman, imports, etc. An excellent fit in the channel directly transfers the Miter 1000HD's incredible accuracy to your project. The Miter 1000's adjustable miter bar will fit square-sided miter slots measuring 3/4" wide, 3/8" deep, and with or without a 15/16" T-slot at the bottom. The miter bar's adjustment range accommodates actual slot widths between 0.740" and 0.765". This Special Edition Miter Fence telescopes from 36" to a full 64" length. Includes the Dual Flip Shop Stop and INCRA's patented Automatic Positioning Control.The expansion disks adjust both sides of the bar for ZERO side play, anti-friction travel on all table saws with standard 3/4" x 3/8" or near-standard miter gauge channels, including Delta, Craftsman, imports, etc. This means that all of INCRA's incredible precision will actually show up in your work because the bar CAN'T wiggle around in the miter slot. The miter bar's adjustment range accommodates actual slot widths between 0.740" and 0.765".
The V120's adjustable miter bar will fit square-sided miter slots 3/4" wide, 3/8" deep, and either with or without a 15/16" wide T-slot at the bottom. The miter bar's adjustment range accommodates slot widths between 0.740" to 0.760". The Miter V27's compact protractor design works on applications typically not candidates for aftermarket gauges because of the narrow distance between the cutter and miter slot. The sled can be set up on either the left side or right side of the blade, and a renewable Drop Panel provides zero clearance tearout control on both sides of the blade. Assembly took about 15 minutes but most of that time was spent fiddling with the darn stop. This is one of those parts you wish they included pre-assembled. The Kreg Precision Miter Gauge features an aluminum protractor head, aluminum fence, and an aluminum miter bar. That’s a bold choice for a miter bar as I can see it being a potential weak point in the design, especially at a length of 24” (the longest you’ll find on the market). The gauge can rotate 50 degrees in both directions and has a resolution of 1/10 of a degree thanks to a high visibility vernier scale. It has 9 positive stops that are engaged with a brass pin, though this is an unfortunate design choice as the pin is not fixed to the gauge and if you should happen to turn the gauge upside down, the pin falls out. I also noticed a little play at each detent, but you can overcome it by putting a good amount of pressure down on the pin and then tightening the protractor head.
INCRA shop stop
Doubles Any Miter Gauge's Crosscut Capacity to 24" and Securely Holds Even the Smallest Workpieces for Safe Accurate Cuts INCRA Miter Gauge V120 features an incredible 120 angle stops which are laser cut into the steel protractor, with a stop available for every whole degree and two special stops at 22.5 degrees for cutting eight-sided frames and mouldings.
Related:
Great Deal 
New Comment