The curing size has been expanded by 42% to 220 x 260 mm to enable post-processing of larger models or multiple small objects in one pass. The washing tank also has a useful cover that hermetically clips in place for easy storage when not in use. It keeps the IPA from evaporating while also keeping the IPA smell inside.

The concentration of the alcohol which is used for washing is not high enough, Use alcohol with concentration exceeding 95%. If you value premium features such as these, the Prusa CW1S might justify the higher price point. Price For the washing station machine, cleaning times may vary with machines from different manufacturers, and use it according to the instructions provided by the manufacturer. The following is the reference for cleaning time, which is suitable for Anycubic Wash & Cure Machines: Model Size Last but not least, we have the Prusa CW1S– one of the best wash and cure station options out there – which carries the same high-quality build and thoughtful design we’ve come to expect from the company’s printers. It defines itself in more than ways from the competition, not least a steep asking price.Where the Creality UW-02 sets itself apart most is the on-machine interface and cycle/timer options. There, users can adjust the speed, mode, and timer (2/5/10/15/20/30 minute options) with a four-button touch layout. Compatibility with other printers can be hit or miss because of the build plate attachment, but you can wash and cure any kind of model using the basket. Expensive: it’s great if you have the budget, but if you’re trying to save, there are other options that are almost as good.

The Anycubic Wash & Cure 3 Plus features a brand-new arrangement of lamb beads combined with a lens light source. Compared to the previous generation Anycubic Wash & Cure Plus, it offers a 20% improvement in curing uniformity*. This results in a more thorough and comprehensive overall curing of the model, ensuring better quality and consistency. A washing station machine is the most appropriate choice as its advantages outweigh the disadvantages. In general, it is not as dangerous and expensive as an ultrasonic machine, but also it can reduce work in post-processing and free your hands. So why not just let the cleaning work be handed over to the washing station machine by pressing a button? The Pros and Cons of washing stations machine PROS: Say goodbye to the energy-consuming task of cleaning resin prints by hand, and say goodbye to the time-consuming process of sunlight curing with uneven results. Anycubic offers powerful 2-in-1 washing and curing stations that free you from the hassle of resin 3D printing. Anycubic Wash & Cure Plus is an upgraded version of Anycubic Wash & Cure 2.0, featuring larger machine sizes and functionality enhancements. In this article, we provide you with comprehensive comparison information on Anycubic Wash & Cure Plus and Wash & Cure 2.0 Machine, and hope that it can help you. Overall Comparisons Specifications The L-shaped light strip design also makes the upper UV lamp adjustable, so that the model is also sufficiently cured from above.When cleaning the resin models, you can choose to do it by directly inserting the build plate in the washing tank without requiring you to remove the model in advance. A benefit of this cleaning solution is that you are cleaning both the model and the build plate at the same time.

This is great news for those of you who are concerned for your safety, and also if you have young ones at home or are otherwise concerned that the protective casing may not be properly attached. Wash and Cure 2.0 vs. Wash and Cure Plus: Which Should You Get?Wash & Cure 3.0 Plus impresses with its simple and minimalist design, which offers two cleaning options:

Though automatic washing and curing is the main benefit of these 2-in-1 machines, it’s also important to have some control of the process. Look for machines with adjustable wash and cure cycle and timer settings with plenty of options. Non-Essential Convenience Features Wash & Cure 3.0 Plus from Anycubic is the perfect 2-in-1 solution for post-processing finished printed resin models. The powerful device with a cleaning capacity of 7.6 litres is the perfect addition to LCD 3D printers with a size of 10.6 inches or less. The basket is useful when you print a lot of small models. This will allow you to remove the models from the build plate, and drop them in the basket close to the bottom of the tank. You will be able to save some IPA because the models will sit close to the propeller, and they will be washed with maybe half a tank of IPA. Here we’ll look at which model you should choose depending on your uses. When to Buy the Wash and Cure 2.0 Washing also comes sided by a unique drying mode that removes liquid from the washed model in preparation for curing, a great function to ward off residue stains. Finally, moving on to the curing mode, the Prusa CW1S uses four UV LED strips beaming at the 405nm UV wavelength.The maximum cure and wash volumes determine the maximum model size a machine supports. If you plan on post-processing bigger prints, invest in a machine with a larger capacity. Compared to its predecessor, the Wash & Cure Plus, the successor version , Wash & Cure 3.0 Plus, has a few changes: If you need to wash and cure large prints, choose the Creality UW-02 with its spacious 240 x 160 x 200mm wash area and 200 x 300mm curing capacity. It’s specially designed for larger resin 3D models. UV Wavelength