Joined in 2023 
82 
63 About this deal
The Aquila C2 by Voxelab is a 3D printer that is the most affordable model in the Aquila line. This printer is very similar to the Creality Ender 3 in appearance, but offers a newer mainboard and more premium carborundum glass bed at an even lower price than the Ender 3. Benefits of the Voxelab Aquila C2 Bare-bones appearance - This printer is not built to be attractive, which is apparent by the standard aluminum extrusions used throughout the design, and the exposed power supply unit. While this is a purely cosmetic issue, it makes the printer less attractive than some of it's more expensive cousins.
When your Voxelab Aquila 3D printer is sitting idle, it will draw around 9 watts. When it’s heating up, the wattage bumps up to 240W, which then levels off to around 90W once the print job starts. Noise Additionally, you can upgrade the hotend in the future if you plan on doing a lot of printing at higher temperatures. This is handy if you don’t want to have to regularly troubleshoot issues with your hotend. Belt tensioners
This Creality Ender 3 clone is really loud, without much to shout about.
Well, 'Tom's' views seem a little elitist..... 'can't decide what it wants to be', where is his confusion?
If the Voxelab Aquila 3D printer doesn’t sound like it’s going to meet your needs, there are plenty of options available on the market. Here are a few alternatives you might consider: Creality Ender 3 You’re not going to get anything fancy with this 3D printer. It looks a lot like any other budget option you might find on the market. It’s not going to blow you away, but it will get the job done. There is no front drawer on the device and the unit’s screen is set to landscape mode. Printing volume Finally, there the BLTouch that’s recommended by everyone. I added this to the guide just so you know this can be a solution for easier bed leveling, but in the free section I will tell you about the free alternative which can be used (manual mesh bed leveling). In my opinion, a BLTouch is not needed for small format printers like the Voxelab Aquila but it can be a helpful upgrade if your print surface is not perfect, and you don’t want to mess with MBL. The printer’s surface is held in place with two metal clips, which lets you remove the glass if you need to. This is a handy feature for cleaning up after print jobs. One item to note is that the Aquila does not have insulation material beneath the printing bed. Power supplyYou could do the same thing using a few screw nuts and a bit of patience, but the silicone bed mounts are quite cheap and will allow you to have your bed fixed much faster. This upgrade is something I started recommending to most of the printers available because it makes bed leveling much easier and should eliminate the need for any auto bed leveling solution like a BLTouch. As expected, the Aquila 3D printer comes with X and Y-axis belt tensioners. This is something you’ll find on newer printers, which is why it’s no surprise to find it on the Voxelab Aquila offering. Bear in mind that you don’t want to overtighten the tensioners because you may wind up with degraded print quality. Plastic extruder Dated LCD Screen - The printer's LCD screen is a more basic monochrome interface with limited resolution and no support for graphical components. While this does not detract much from using the printer, it can take a bit longer to navigate through the text only menus, and gives the printer a less premium feel. Where to buy the Voxelab Aquila C2 Moderately difficult assembly - This 3D printer is shipped partially unassembled, and will require more time to put together. This can be a good learning experience to better understand how the printer works, but can be a challenge especially if you are new to 3D printing. This printer is a staggeringly good value, professionally made quality product that has more functionality than the much vaunted Ender 3 v2.
Related:
Great Deal 
New Comment