If the extender has advanced features, we’ll also factor these into our review; we’ll thoroughly explore the configuration portal to see how responsive and user-friendly it is, and, if the unit has an Ethernet port, we may test network performance over a wired connection. Every Wi-Fi extender we review goes through extensive hands-on testing. Each unit is installed in a real home, at an appropriate distance from the main Wi-Fi router according to the manufacturer’s recommendations. If it’s a powerline system, we connect the base unit to the main router via gigabit Ethernet and, again, situate the remote unit according to the instructions.

Well, people normally get confused between these technical jargon’s. However, all three terms (i.e. Wifi Booster, Wifi Repeater and Wifi Extender) are used interchangeably, these devices are ultimately used to strengthen the range of wifi signals in your home or office dead zones. As a bonus, if you have a TP-Link router that supports its OneMesh technology, you get hassle-free, seamless connectivity wherever you are in your home. Needless to say, you need a Wi-Fi 6 router and compatible devices to make the most of it, but this extender gives you the latest wireless tech at a bargain price. The Magic 2 kit beats the old Magic 1 kit we had in this slot by giving you two high-speed 867Mbits/sec Wi-Fi streams for little more than the price of one, which comes in handy if you’re trying to network two or more devices. Advanced users will appreciate the companion app that shows connection diagnostics, so you can work out where to locate the plugs for the best performance. The web portal, meanwhile, lets you manage your wireless configuration, set up a guest network and apply an operating schedule so that (for example) the extended network is only available during office hours. The newer Wi-Fi 6 kits will give you even more performance if you have Wi-Fi 6 devices, but if not this is a great solution. Naturally, however, connecting devices to an extender via Ethernet won’t be as fast as a direct wired connection to the router because the signal still needs to travel from your router to the extender over the airwaves first. What other features should I look for? The downside of these speeds is that they involve a design that looks more like a small router with a separate power supply. However, this gives you more flexibility than a plug-in unit, helping you to get a better signal, while you can also use this repeater as a Wi-Fi access point. And, just like the Repeater 3000, it’s as simple as anything to set up. The WiFi 6 Repeater 5400 will be overkill for many people, but if you must get a high-speed connection to a distant corner of the house, nothing else out there comes close.To test network performance, we use a laptop equipped with an Intel Wi-Fi 6 network card supporting 2×2 MIMO. We connect this laptop to the extended network, then take it to various areas of the home and copy a standard set of files to and from a NAS appliance, connected by Ethernet to the main router. By measuring the average read and write speeds, and comparing them to those achieved when connecting directly to the router, we can measure how each extender helps Wi-Fi range and performance. Step 3 # Locate the reset hole or button your wifi extender. The reset button or hole would be either at the bottom or on the top of BT wifi extender. It would depend on wifi extender models.

Technically speaking there is a difference between wifi booster/wifi repeater and wifi extender in terms of their operations and usage. Mesh networking systems work in a similar way to Wi-Fi repeaters but they give you the option of placing multiple nodes all over your home to cover a larger area than a single extender could manage. You can learn more, and explore our recommended models, in our guide to the best mesh Wi-Fi routers. Scenario 1 # You want to reconfigure your wifi extender because you have changed your service provider. The RE450 isn’t the cheapest Wi-Fi 5 extender, but it’s faster and more stylish than the budget competition. Don’t be put off by its age: it still deserves a place on anyone’s shortlist.The bigger brother of the lovable RE505X is another compact, plug-in Wi-Fi 6 extender, but with the speeds boosted to meet the AX3000 spec. Similar to its cheaper sibling, this model is easy to set up and configure using TP-Link’s Tether app, and it supports OneMesh technology for seamless roaming around the house. If you have a compatible TP-Link router, it can even set up the RE700X while in this mode. Step 5 # You will notice that when you continue to press the button for 10 seconds, the wifi extender light start flashing. Step 4 # Insert the pin or pencil in the reset hole and press the button i.e. press button for 10 seconds continuously. It’s very easy to use as well, with setup managed by the superb TP-Link Tether mobile app, which provides access to all the settings you might need.