Joined in 2023 
82 
63 About this deal
When it comes to solid front and roof panels, the big concern for any user is access to air. As soon as you put anything in the way, you’re immediately reducing how much air those front fans can draw in. It’s a problem that both NZXT and others (such as Phanteks with its Evolv series) has predominantly faced in the past and you can tell that these companies have taken steps to reduce this problem, without compromising on the overall style of the case. If you are looking for a recommendation, the NZXT PCIe Riser Cable is an excellent choice that not only meets these requirements, but also provides PCIe 4.0 compatibility. Can the Aer Trim be installed on the included fans? Turning the H710i around we see a small piece of plastic with the company name (attached onto the thumbscrew area of the left side panel), an AER F140 fan (1000RPM/68.95CFM/29dBA), 9 PCI expansion slots (7 horizontal + 2 vertical) and the PSU area. Size does matter when it comes to PC cases or PC towers. Therefore, knowing the dimensions and specifications of both the NZXT H710 and H710i case sizes is essential. Their size determines how many important components can be installed inside and reflects how efficient the performance is. The H710i or the I version comes with the Smart Device and two pre-installed LED strips. Through CAM software, it can handle the integrated LED lighting settings and fan control.
The H710 and H710i have plenty of space inside, which can support 120 mm radiators on the rear side and up to 360 mm radiators on the front and top. Installing 120 mm or 140 mm cooling fans can also help with ventilation. Moreover, both the H710 and H710i come with RGB lighting pre-installed, which adds character to your finished build by utilizing the tempered glass side panel. There's an RGB and fan controller that's installed just behind this bar and is hooked up to two RGB LED strips preinstalled by NZXT at the factory. There's space for an additional RGB channel, but all three fan ports are occupied by three fan splitters ready for all your favorite case blowers.At the base of the H710i we find a rear removable air-filter and the rails where you can move the internal 3.5/2.5" drive cage. The Firestrike Extreme stress test on loop raised GPU dT to 50.7C, just a little warmer than the original torture test and therefore even more competitive with the other cases, where the firestrike test often raises temperatures by a couple degrees. It lands between the PM01 and the H500M Mesh, largely beaten out by the group of cases with bottom intake GPU cooling solutions like the HAF X and the RV02. Standardized Fans
The H710 series of cases only supports EATX motherboards up to 10.7 inches in width. You may be able to install wider motherboards by removing the included cable bar, however this may negatively affect the aesthetics of the case and remove some cable management options such as tie-downs that are part of the cable bar. What length PCIe Riser Cable should I use to vertical mount a GPU in the H710i? Otherwise, the H710i features a lot of the same features as the NZXT H700i. Plenty of intuitive cable cutouts and passthroughs, a roomy interior, quality finishes on all of the folded steel, and a lot of versatility as to where you can run your cables. Rear Cable Management and HDDs Due to the patented cable management system, there are no "regular" grommets on the motherboard tray (minus the usual CPU cut out). The NZXT H710 and H710i share almost the same features. They both measure 230 mm x 516 mm x 494 mm. Both of them are made of SGCC steel and tempered glass and weigh around 12.1kg.At the top of the case is room for up to three 120mm case fans or a 360mm water-cooling radiator, but accessing these mounting spots will take some work. To get to them, you first need to remove the front panel by pressing plastic clips that are located all around the panel, then pulling upward. After that, you do the same thing to the top panel, but this is made more difficult by the presence of LED strips and the cable bar. It’s certainly doable, but from the get-go, based on my experience, if you plan to add extra case fans or a liquid-cooler radiator up top, be ready for a bit more work than usual. This is the price you pay for such a featureless (and free-of-fasteners) front and top panel. After giving it much thought, we decided on performing noise tests with each PC Case we receive by placing our ExTech HD600 vertically on top of each case to measure the noise levels emanating from the pre-installed fans at both 50% and 100% with the help of a fan controller (if the case doesn't have one, we use our own). PC cases not only protect your motherboard, processor, and graphics card from debris, dust, and other environmental hazards, but they also provide ventilation for your motherboard, processor, and graphics card, ensuring that everything stays nice and cool. As always, the purpose of this section is not to build a functional system but rather to showcase what you can expect from the case at hand in terms of interior space. If you want a high-quality PC case with an ergonomic design, the NZXT PC cases are probably what you’re looking for. The NZXT H-series PC cases are expertly crafted PC cases with some outstanding features at an affordable price.
Measuring 516mm in height, 494mm in depth and 230mm in width the H710i is a rather large mid-tower PC case. As mentioned above, both the NZXT H710 and H710i PC case models have the same SGCC steel and tempered glass side panels, which act as a window into the interior of the PC cases.
Clean looks meet innovative design.
There's plenty of space for long PSUs even with the default drive cage position (if you need more just push it to the left). Both the features and specifications of the H710i are listed in the right side in 10 languages (color selection and barcode are also present here). Source: Rich Edmonds / Windows Central (Image credit: Source: Rich Edmonds / Windows Central) You should buy this if ...
Great Deal 
New Comment