Eggshell:Gives an on-trend, more matt finish. For use on interior, wood, walls, ceiling and metalwork. Apply the wood grain filler on the surface of the plywood using a scraper to press it into the imperfections in the wood. Allow the wood grain filler ample time to dry and then sand the entire surface of the plywood with 220-grit sandpaper.

Satin finishes are also excellent for hiding imperfections in the material that’s being painted, and a lot more flexible on the material that you can apply them to. Either way, you still end up with a good finish. Gloss can be a bit daunting if you’re new to decorating but there’s no need to be nervous of using it. ‘The thought of gloss paint can be scary,’ agrees David Harris, design director at Andrew Martin. The best paint on plywood to achieve an ultra-smooth modern finish is acrylic paints and enamel paints. If you do not manage to achieve a smooth surface and need more and more sanding, you run the risk of sanding through the clear coat and into the color. Apply the primer to the plywood. Apply the primer in an even coat on the plywood, using a roller of a paintbrush.

Taking care

For light-colored paint, use a light-colored primer, but start with a darker primer for darker paint. Prepare your plywood by sanding it smooth with first 120-grit sandpaper and then 220-grit sandpaper. Wipe the plywood down to get rid of the dust, and you are ready to start whitewashing. A satin finish offers just the slightest sheen. It isn’t completely matte, as it does reflect light a bit, but isn’t a particularly reflective surface either. In many cases, any light bouncing off of the finish is barely noticeable, if you see it at all. Art Supplies Artist Paint & Pencils Paint Brushes Craft Tools Stamps & Stencils Cutting Tools & Mats Resin & Accessories Craft Books All Craft Shop

If you have problems with the staining process, you should read our article on “How To Fix A Bad Wood Stain Job” for some tips and ideas.There are more than 20 different types of plywood, including softwood plywood, hardwood, marine, and even flexible plywood. To remedy the defect, it is necessary to apply further coats, avoiding any earlier faults in thinning, stirring or application.

Usually, the gloss finish is more expensive because the manufacturing timeline is longer and needs multiple layers to create a smooth surface. For this reason, the guitars with gloss finishing are more expensive and need more maintenance. When applying the seal coat with a brush, use even, overlapping strokes. Keep an eye on corners and edges; puddling tends to occur in these locations. The satin guitars tend to have a thin coating and don’t reflect much light when compared to the gloss guitars. The satin finish creates a rustic and old-school look. However, these finishes are more prone to humidity and weather changes.This technique will age your plywood to give it the look of an old weathered barn door, or the look of a piece of driftwood washed up on the beach. An improvement in atmospheric conditions, when these are the cause of slow drying, may allow the coating to dry eventually although it is likely that its appearance may be impaired and a further coat may be required. The main difference between satin, semi-gloss, and gloss paint is the sheen, with each option being progressively shinier than the last. While semi-gloss and gloss generally offer higher levels of durability, satin still stands up admirably to wear and tear. As a result, beyond sheen, they are highly comparable.