You're able to select a preferreddelivery date in your shopping basket. Whilst we aim to deliver your items on this date, it is not guaranteed. Before using this product, it is recommended to use A/C EasyDry if moisture is present in the system.

Paving, Pointing & Grouting We offer a range of pointing and grouting materials for jointing your patio slabs, outdoor paving or driveway including flowable slurry grouts such as UltraScape Flowpoint, brush-in grouts like EasyJoint and gun injected mortar for fine pointing. As well as supplying paving primer, sealants and paving and driveway cleaners. This Coldseal Self-Adhesive Top Sheet Roofing Felt from IKO is a part of their Easyseal system that doesn't need any flames during installation. As a result, you have an increase in safety and a reduction in difficulty for application. Attach other end of charging hose to low side service port. As this is done, there will be a very small release of system charge that will purge air from the hose.This product is not suitable if surfaces have been treated previously with a silicon or stearate based water repellent The EasySeal self-adhesive roofing system has been designed to remove the requirement for hot bitumen and or naked flames for anyone installing roofing membranes. EasySeal is a two-layer high performance system, which was originally developed for small roofs, such as those over garages, porches, extensions and dormer windows etc. However, the fire-safe benefits of EasySeal are equally applicable for large projects. The self-adhesive application process, using no hot bitumen, gas torches or large amounts of messy liquids, makes it an ideal option for experienced contractors or competent DIY installers alike. Next Day products are available across most of the UK, however, restrictions apply in certain areas postcode area: Apply two coats, if using a brush or roller, apply the second coat by brushing or rolling at right-angles to the previous coat at a rate of 4 – 6m2 per litre. Apply the second coat between 3 and 24 hours after the first coat is touch dry Once product is dispensed, remove hose from low side service port. Retain hose for future installations and dispose can properly.

Treat any efflorescence or staining before application, allow a few weeks before applying EASYseal BCS to ensure efflorescence doesn’t reappear EASYSeal BCS is ideally applied to a dry surface but can be used on lightly damp – not wet or soaked surfaces, must be free from standing or ponded water Manufactured from a polyester base with an SBS (Styrene Butadiene Styrene) bitumen coating, this Easyseal roofing top sheet also features an upper surface with a special finishing of slate mineral. The release film protects the underneath of the sheet and can easily be removed with ease when installing to BS 8217: 2005, 'Code of Practice for Reinforced bitumen membranes for roofing' and IKO fixing guidelines. Features & Benefits: IKO Easyseal / Coldseal Self-Adhesive Top Sheet Roofing Felt - 6m x 1mWe can only provide a delivery date and are not able to confirm the time delivery will be attempted. Therefore, we ask that somebody is able to accept and sign for your items throughout the started delivery date. Tarmac & Pothole Repair We offer a range of permanent pothole repair & pothole filler materials such as Ultracrete Permanent Pothole Repair, instant tarmac including Ultracrete Instant Road Repair 6 & 10mm, cold joint sealants, line marker paints and anti-skid patch repair. IKO EasySeal roofing membranes should be installed generally in accordance with BS 8217: 2005, ‘Code of Practice for Reinforced bitumen membranes for roofing’ and IKO fixing instructions. EasySeal roofing is applied as a two-layer system, bonded by the removal of the release film on the reverse of the product, in accordance with the detailed 'Step by Step' fixing instructions available from IKO. In most cases, one can will seal systems that have lost all refrigerant in as little as seven days and is designed for large systems up to 5 tons. For systems 1.5 tons to fractional, use A/C EasySeal-SS. For commercial systems with refrigerant charge of 125 lbs. – 250 lbs., use A/C EasySeal-XL.

Work diagonally across the joints, in straight lines & in one direction, do not allow the material to pool NOTE: You may also use a refrigerant cylinder to push sealant into system while charging if the system is low on refrigerant. Just connect EasySeal Ultimate to service port and inject refrigerant through injector into system while charging. Apply generous even coats with a long pile roller to the natural stone at a coverage rate of 4-5m2 per litre. Do not allow the product to pool or the final appearance may not be even in colour on the paving to be enhanced and sealed upper surface has a non-removable polyethylene film, with a removable release film to the underside. Both the capsheet and underlay have specially formulated self-adhesive additives in the coating. For those who need to install roofing membranes, but want to avoid the hassle and experience requirements that ‘torch-on’ methods such as hot bitumen or use of naked flames usually bring with them, the BBA approved IKOR Easyseal self-adhesive roofing system is absolutely for you. An extremely versatile product guaranteeing an excellent performance on any flat roof it is applied to, this excellent product is made up of a polyester reinforced aluminium core and a bitumen coating.metres of control layer means you’ll be able to cover plenty of area on your roof with just one roll Apply a second coat whilst the sandstone remains damp from the first coat. Timing depends on temperatures and the type of stone* (This sealer enhancer is suitable for most types of natural stone). Surfaces should be clean, dry and free from mould, debris, algae and efflorescence before applying to the sandstone