Cambridge Audio AXR85-85 Watt Separate HiFi Stereo Reciever Featuring Built-In Phono Stage FM/AM Radio and Bluetooth 5.0 - Lunar Grey

Product Information

Most stereo receivers that have been released in the past few years have built-in streaming capabilities — but they are anything but equal. The older (or cheaper) models generally just support Bluetooth, but they likely don't support higher-resolution option like Bluetooth aptX HD. And then the newer (and more expensive) models add streaming over Wi-Fi (such as AirPlay or Chromecast built-in), which allows you to stream lossless-quality audio as well as integrate your stereo setup into a larger multi-room system with your other wireless speakers or soundbars. Phono input Press the Source button on the front of the unit corresponding to your desired source. Alternatively, you may use the appropriate button on the remote control. If your loudspeakers are equipped with two sets of terminals, then it is possible to connect them in the bi-wire configuration. It is possible to change the tuner region settings for this unit. This can be necessary if the unit has been moved to a different country.

When two or more devices are connected to a common ground through different paths, ground path noise, or a ground loop can occur. A potential difference between these two grounds can cause unwanted noise voltage in the circuit paths. Currents flow through these multiple paths and develop voltages which can cause damage, noise or 50Hz/60Hz hum/buzz. After making any connections to your unit, activate the AXR by pressing the Power On button on the front of the unit. The CXN V2 uses dual Wolfson WM8740 24-bit DACs. These are even better than the ones in the CXA81. But if you wanted to use it as a streaming source with a very high-end multi-thousand dollar DAC, it gives you both Toslink and coaxial digital outputs. Cambridge Audio also understands you may have more digital sources you want to run through the unit. So they give you a coaxial and Toslink digital input. For connecting it to your integrated amp or preamp, You have both balanced and RCA outputs. The final icing on the cake is that you can set up the CXN V2 to have either fixed or variable output. This means you could use it in the fixed output mode to run into your integrated amp or preamp. But if you just wanted a digital-only system, you can connect it directly to a power amp. The CXN V2 is just flat out an incredible product for the money. You can use it with any system and in a variety of ways. ConclusionPress and hold both the 4/9 and Menu buttons at the same time. The display will show the software revision and followed by either a letter ‘CU’ which represents North America or a letter ‘EU’ which represents Europe/Rest of the world.

Of course, there are still stereo receivers out there — you even buy a vintage stereo receiver— and they're the ideal solution for people who want to create a classic stereo hi-fi system. You get a stereo receiver, hook it up with a set of passive bookshelf speakers, and from there you can either stream audio to the receiver or hook up an analog source, like a turntable or CD player. Use the ' Skip / Scan' button or ' Preset' buttons to select the preset location for the station to be stored to. Note: For ease of tuning on first time use, we recommend that you set the AXR to ‘Auto’ mode. Press the Mode/Store button on the front of the unit. This button cycles through Preset, Auto and Manual, modes. The Speaker A/B button on the front panel and remote control allows the two sets of speakers to be toggled on and off. Refer to the Front Panel or Remote Control section of this manual for more information on the Speaker A/B operation. For those who want to enjoy music without being disturbed during the advanced hour, the new Cambridge Audio AXR100D has a headphone connection directly on the front.

Specifications

Under the display, there’s a row of four buttons, each corresponding to the relevant analogue input on the rear. A volume dial and menu button are on the right, while a 6.35mm headphone output and 3.5mm auxiliary input sandwich the amp’s infrared receiver on the left. Note: To add another Bluetooth device, Press and hold the Bluetooth/Phono button to disconnect the current connection and repeat step 2. When using a banana plug, make sure the speaker terminals are completely tightened before inserting the plug.