Primer and undercoat adhere well to wood and will provide a longer-lasting finish, but emulsion helps create the distressed look well. Advice: 2 coats are recommended with further coats increasing the solidity of the colour. Wood Stain + Protect is a wood stain coating so will wear off over time. If applying Wood Stain + Protect to a garden building that will be subjected to high levels of exposure to weather, it is recommended that you apply Protek Clear Tough Coat as a top coat. Choose a day when the weather isn’t too humid. Varnish will dry slower in humid or cold conditions, and there’s more chance of dust and dirt settling on your project before it’s fully dry, which means you’ll have an imperfect finish.If working indoors, use the heating to get the room temperature somewhere between 20 and 25°C. If the room is too hot, the varnish will dry too fast and messy bubbles might form

Pro Tip: If the varnish is stubborn, reapply the stripper and wait until it gets to work. Now try scraping again. Believe it or not, lacquers are the same as varnishes. The trade often use the term ‘lacquer’, while the general public tend to use the term ‘varnish’. Acrylic varnish All three of these stains look good, but white wash covers the grain more. Depending on your desired result, that could be good or bad. Oak If there is any roughness to the wood before application it will be better to sand the wood first, this will help to avoid any snagging when in use. Once clean and smooth you can look at applying the Manns Extra Tough Interior Varnish this will give a smooth and durable finish to the bobbins.

Apply even layers

This can lend an antiqued look to furniture and is a cool option if you haven’t tried it before. How do you stain wood white? Always read the instructions before breaking the lid seal. Know how it works and where to use it before making costly mistakes. Here is a list of considerations you must heed:

Start with 150-grit sandpaper to remove as much material as possible, then switch to 220-grit to create a smooth surface. There are literally dozens of products that can be used to achieve a white wood finish. From a subtle Scandinavian white wash effect to something altogether more bold, or opaque, the following products will achieve these and about everything in-between. Pro Tip: Lay down dust sheets because as the hot varnish falls, it may adhere to floor surfaces or, worse still, burn carpets and rugs.

Strip previous finishes

There’s a huge range of white opaque and semi translucent wood oils, stains & paints Some useful products for achieving white finishes

It may come off in layers, especially if it’s an old varnish that’s been recoated several times. Apply more white spirit as necessary, and keep working until the varnish is gone. Of course, you don’t need to be majorly over-specific and often times you’ll find that a good eggshell paint has more than one use…just don’t use it on your garden fence! Get Prices for a Professional Decorator Near You Simply White and Antique white are very subtle whites that just tone down the yellowyness. White stain vs. white paint Thank you for your enquiry. A stain will need to be able to absorb into the surface of the wood and any pre existing treatment may prevent this. So you would need to strip off any old varnish. The wood that you are applying to can have a direct impact on the colour that will be achieved with the stain. Pines, for example tend to have a naturally red, orange or yellow colour and application of stains, varnishes or oils can highlight the already natural tones of the wood.Osmo Polyx Oil Raw 3044. They can be used in all sorts of exciting combinations for a choice of intensities. Do you want your finish a subtle washy white or very white indeed? Number one is the subtlest, number five the most intense. Barely detectable white finish Excellent paint, excellent price and a must-buy for all the intricate woodwork projects around the home.