Comfyable Puffy Laptop Sleeve 13 Inch 14 Inch, Quilted Puffer Laptop Carrying Case for Women, Pillow Case Compatible for MacBook Air M1 M2, MacBook Pro 13 Inch 14 Inch, 13 in 14 in Cover, Rice

Product Information

Reach in between the double fold at the base of the laptop bag and start pulling the fabric through so the right sides are showing. STEP 10: Press the diy laptop case Remember the base is the only part stitched to the lining, and it still has a gap in it – this is to pull the fabric through when you are nearly finished. You will now have an envelope shape.

With right side to right side of lining and outer, pin together and stitch across the base only leaving an opening in the middle of around 3 inches (10cm). Fold so the right sides face out and pin the base turning in the raw edges of the gap you have left, so it is smooth, then press with an iron on the base only. Take the shape you have cut for the outer sleeve and lay over the folded piece of outer fabric and cut the same angles. This will form the closing flap of the laptop case. STEP 4: Stitch the base of the laptop sleeve The first thing to do is to measure the laptop for which you want to create a diy laptop sleeve. To do this measure the length of the laptop as it sits on the desk facing you. You’ll need the width (A), depth (B) and height (C) as shown on the image below. Now unfold the fabrics and machine stitch each Velcro piece in the spot marked to the SINGLE layer of fabric.

More storage and organizers to sew

Pin the zipper on the right side of the front piece with zipper facing down. Sew using your zipper foot. Take it slow as your reach the corners. Take the piece of the lining fabric as seen below and fold in half along the length, folding over the corner to meet the other corner of the flap. Take a ruler and measure 2″ (5cm) on either side of the corner, connect the dots with a diagonal line, and cut along the line.

So ladies, let me know, do you want me to make you life easier and make you a laptop sleeve pattern calculator to do the math for you? Let me know in the comments belowTIP: If you are using a cotton fabric without any structure, add fusible lining or batting on top of the cotton. STEP 3: Make the top fold Cut the fabric to the size of your laptop as described above. You will need one piece for the outer sleeve and one piece of felt for the lining. This laptop sleeve pattern does not use a fusible lining, making it even easier.