A great all-rounder this SUP has a shape that ensures great stability and speed in every water condition. Supplied with the ultra-lightweight adjustable 4-piece aluminium paddle, you can set it up to suit your paddling style. Inlet port 1 inch (25mm) female BSP. Output port 1 inch (25mm) female BSP provided with a push-fit connector for 1 inch (25mm) MDPE pipe. guarantees the plates are within tolerances of 0.001 mm and the size critical parts need no machining. HydroForce™ Rainwater Harvesting Clean Water Pump Series 3 is a submersible rainwater tank pump – electronically controlled, pressure sensitive, centrifugal roto-dynamic with no reciprocating parts. Built-in non-return valve and double dry-run HydroForce pump rainwater pumps for flat tanks, deep digprotection. Underwater or surface mount water pump. British Engineering and Manufacture.

Alloy bulkhead, pressure release gap and twin chamber design prevents ingress of water to motor, electrical components and to bearing oil.

You might consider

For example the patented plate is manufactured by a process of high pressure aluminium die casting. This Our range of paddleboard pumps will get your board topped up in minutes and make the whole process easier. And don’t worry, our inflatable paddle pumps last the test of time with a heavy-duty hose to stay resilient throughout your tour and beyond. Electric Paddle Board Pumps Using the most rugged components available it has been extensively tested for trouble-free running. The pump features a self-controlling

The HydroForce Series 3 is a high-quality pump for use under water or surface use in or with rainwater harvesting tanks. The Hydroforce Rainwater Harvesting pump is an electronically-controlled, pressure-sensitive, centrifugal roto-dynamic pump with no reciprocating parts. The Series 4 will deliver up to 3.5 bar (household pressure is around 2.5-4.0 bar). If connected to a hose or tap, the pump will automatically start to pump water when the tap or hose is turned on. The pump delivers over 2500 litres per hour using a 1″ connector and uses 800 watts at 220-240v AC delivered by a 5 metre cable. This SUP is constructed with drop stitch material where thousands of fibers connect the top and bottom of the board. This provides exceptional strength and rigidity, similar to a hard-sided board, while still keeping it lightweight, portable and easy to store. performance is to spec, and the performance of each pump is automatically logged against its bar code number to assure tighten the screws to the correct torque- preventing splitting the casing if too tight or ingress of water

HydroForce Rainwater Harvesting Pump 800w

A clean, clear and technologically advanced production like make the manufacturing process fast, efficient Inflating a paddle board requires a pump that provides air with high levels of pressure so you can inflate your board in a reasonable amount of time and get into the water as soon as possible. Browse our range of Decathlon SUP pumps including manual and electric paddle board pumps to find your fit. Decathlon SUP Pumps

in the heart of the UK. HydroForce™ Pumps Ltd is part of the same family as Rainwater Harvesting Limited pressure switch, dry run protection and a non-return valve. It is suitable for total immersion in the water tank or it can be and twin chamber design prevent ingress of water to motor, electrical components and to bearing oil. The exterior bodywork is an Italian-styled shape which is stable in the floor of a water tank. The pump and electrics Dry-run Protection: when no water is detected for 8 seconds, the pump is turned off by the printed circuit boardThe pump features a self-controlling pressure switch, dry run protection and a non-return valve. It is suitable for total immersion in tank water or it can be externally connected to the tank above ground. As with other submersible pumps, it is obligatory to prime the pump by removing the filler screw and filling the body of the pump with 2 litres of water, then replacing the filler screw.