NETGEAR 24-Port Gigabit Ethernet Smart Managed Pro PoE Network Switch (GS724TP) - Hub with 24 x PoE+ @ 190W, 2 x 1G SFP, Desktop/Rackmount, and ProSAFE Protection, Black, grey

Product Information

The GS724TPv2 24-Port Gigabit Switch with PoE+ and 2 SFP Ports joins the NETGEAR Standalone Smart Managed Pro Switches family, adding full 24 port PoE+ support for deployment of modern high-power PoE devices. Cautious spender organisations can now deploy denser PoE+ devices connected to a cost-effective switch, with a reasonable PoE power budget of 190W. Fixes the issue when an OUI is added, the last two hexadecimal are changed to E0 instead of the entered value. Switches with Essential L2 Features for SMB NetworksNETGEAR Smart Managed Pro Switches offer powerful L2 and L2+/Layer 3 Lite features, great PoE functionality, and enhanced performance and usability. They are purposely designed for converged networks where voice, video, data are all carried on a single network platform. These switches are optimized for network efficiency, operational cost savings, and ease of management. These switches are the ideal solution even for the most advanced small and medium organizations looking for the best combination of features, performance, and value.

The GS724TPv2 24-Port Gigabit Smart Managed Pro Switch provides a great value, with configurable L2 network features like VLANs and PoE operation scheduling, allowing SMB customers to deploy PoE-based VoIP phones and IP surveillance. Advanced features such as Access Control Lists (ACLs), L2/L3/L4 QoS (DiffServ), LACP link aggregation and Spanning Tree will satisfy even the most advanced small business networks. If you are updating GS724TPv2 FW from v1.1.1.x to v2.0.6.x, make sure to follow these instructions carefully.PoE+ support on all PoE models with the GS510TLP, GS510TPP, GS418TPP and GS728TPP providing PoE+ support on all ports L2/L3/L4 access control lists (ACLs) for granular network access control including 802.1x port authentication

NETGEAR Smart Managed Pro Switches offer powerful Layer 2 features, great PoE functionality, and enhanced performance and usability. These switches are the ideal solution even for the most advanced small and medium organisations looking for the best combination of features, performance, and value: they are purposely designed for converged networks where voice, video, data are all carried on a single network platform.After you update the firmware to version 2.0.7.4 or a later version, we recommend that you do not downgrade the firmware to version 2.0.6.x or an earlier version.

Authentication protocol for SNMPv3 automatically changes to “MD5” if the current setting is “None”. Caution:Existing configurations will be erased after updating the firmware from v1.1.1.x to v2.0.0.x. Furthermore, configuration files are not compatible between v1.x.x.x and v2.x.x.x firmware. Auto-Video VLAN, following the same concept of Auto Voice, help speed up your deployment of IP-based surveillance systems Cisco Catalyst 2960-L Series Switches are fixed-configuration, Gigabit Ethernet switches that provide entry-level enterprise-cla In firmware version 2.0.7.4 or later versions, after you manually disable HTTPS, when you access the device UI over HTTP, you are automatically redirected to HTTPS.After HTTPS is enabled manually, accessing device UI via HTTP will be redirected to HTTPS automatically. PoE devices are putting a strain on switching power demands.” As a leading provider of network equipment for SMBs, NETGEAR understands the importance of providing great choice of PoE port counts and power budgets that can adapt to the business’s needs, whether in the hospitality, catering, education or retail domains.

Add Secure Diagnostic Mode (SDM) to allow NETGEAR Support to establish a secured connection for remote troubleshooting. This is disabled by default. Netgear 8-Port Multi-Gigabit/10g Ethernet Ultra60 PoE++ Smart Managed Pro Switch with 2 SFP+ Ports (MS510TXUP) Important: After you update the firmware from version 1.1.1.x to version 2.0.0.x, the existing switch configuration is erased.Configuration files are not compatible between firmware version 1.x.x.x and version 2.x.x.x.Caution: Existing configurations will be erased after updating the firmware from v1.1.1.x to v2.0.0.x. Furthermore, configuration files are not compatible between v1.x.x.x and v2.x.x.x firmware. The SNMPv1/v2 default community strings “Private” and “Public” are not available in firmware version 2.0.7.4 or later versions. Before you update the firmware, set different community strings. Read and follow these instructions before you update to firmware version 2.0.7.4 from an earlier version: The presence of SFP ports provide necessary fiber uplinks, while dedicated SFP ports on many models further builds uplink redundancy Smart Control Center, a powerful tool for multi-switch discovery, deployment, monitoring and firmware upgrades