Joined in 2023 
82 
63 About this deal
A firmware update can resolve issues that the previous firmware version may have and improve its current performance. To Upgrade The EAP660HD can put out a maximum of 1.53Gbps through its Uplink port. For the following test points, iperf2 was run using the HE.Net application for Android. At a one meter distance, the speed drops to 782Mbps and further decreases to 431Mbps and 183Mbps at seven meters for two different floors. The speed eventually reaches 42Mbps outside of the house at ten meters. The results fall in line with other similar access points. The competition Since the TP-Link EAP660 HD is a part of the WiFi 6 access points, it does support the OFDMA technology (Orthogonal Frequency-Division Multiple Access) which means that the AP is allocating multiple sub-carriers (RUs) of the bandwidth to multiple users which should translate in a far more efficient performance on both the 5GHz and the 2.4GHz band. And yes, the TP-Link EAP660HD does support ODFMA ul and dl on both bands. Besides this now mandatory technology, there’s the expected support for MU-MIMO which has the role of serving multiple clients at the same time. It’s a nice feature to have with compatible clients, although it’s not going to improve the performance in a significant manner. Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty. Open Source Code For Programmers (GPL)
Fixed the bug that the wireless clients which install the Omada APP may disconnect from the 5G radio of EAP if we change the 2.4G channel or Tx power of this EAP in the Omada APP.Using Omada controller to configure multiple SSIDs with different VLANs on TP-Link Omada EAPs and Switches to work with a non-Omada gateway(Multi-Net NAT supported) 07-07-2023 17563
Feature Filter: All Q&A of functional explanation or specification parameters User Application Requirement Troubleshooting Configuration Guide official statement Further Assistance FAQs
The Ubiquity U6 LR access point looks a lot like the EAP660HD. It offers similar performance in terms of bandwidth and has a 4x4 radio system. But like the WAX214, the Ethernet uplink port is limited to only 1Gbps while the single-core CPU is not in the same class as the EAP660HD quad-core. You will get more for your money with a EAP660HD. Final verdict The only complaint is that it is physically imposing and isn't the kind that will go unnoticed. The EAP660HD will provide a great value for money with its quad-core CPU and a 4x4 radio. It can also be managed remotely thanks to TP-Link’s Omada SDN cloud service which is free if a dedicated computer is available. TP-Link has once again shown that a good product can be obtained without costing an arm. It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
And then, there’s the BeamForming which focuses the signal towards the compatible client devices, reducing the impact of interference and improving the available bandwidth. But, since most users will want multiple of these devices to work together and form a single network, there is the expected support for the mesh technology. Using the Omada controller to configure multiple SSIDs with different VLANs on TP-Link Omada EAPs and Switches to work with a non-Omada gateway(Multi-Net NAT supported) 06-08-2023 17563 IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process Note: The TP-Link EAP660 HD is an AX3600-class wireless access point, which means that the theoretical maximum data transfer rate on the 2.4GHz band is 1,148Mbps, while on the 5GHz, it’s 2,402Mbps – don’t get your hopes up, because you’re not going to see this performance outside lab conditions. Features and Wireless Test
Hiệu Suất Có Dây Được Tối Ưu Hóa Với Cổng 2.5 GE PoE +
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
What should I do when the Omada Software Controller (V4) fails to discover the devices? 11-23-2021 87578 What's the difference between Master Administrator, Administrator and Viewer account in Omada Controller? 04-20-2023 16277 Feature Filter: All User Application Requirement Troubleshooting Configuration Guide official statement Further Assistance Q&A of functional explanation or specification parameters FAQs Seamless Roaming requires that clients need to support 802.11k/v and may require additional set up. Performance may vary depending on the client device.What should I do if I cannot start the Omada Controller in windows system (Controller 4.1.5 or above) 06-07-2023 63393 Add support for displaying CPU utilization, memory utilization, and bandwidth-related configuration in the Standalone mode of the Omada APP. Furthermore, if you do decide to use a PoE switch, then the TP-Link EAP660HD doesn’t require that much power (only up to 21.5 W), so you don’t need anything that fancy, but a multi-Gigabit Ethernet switch is still a preferred option. And that’s because of the 2.5GbE port (it’s a shame not to try and take advantage of it, but we’ll see if the WiFi will actually allow us to go above 1Gbps). Internal Hardware Using the Omada SDN Controller to Manage Omada Devices Across Multiple Locations Via a VPN Connection (Controller 5.0 and Above) 05-05-2023 17169 Yes. Requiring the use of OC300, OC200, Omada Cloud-Based Controller, or Omada Software Controller.
Great Deal 
New Comment