Cromapol Acrylic Waterproofing Coating Grey - 5 KG

Product Information

Whilst every endeavour has been made to ensure that this information is reliable, we cannot accept any liability for loss, injury or damage which may result from its use. With November upon us, the poor weather is setting in. It’s during the final months of the year that small leaks can begin to become apparent. This is particularly the case on flat roofs, where the severely hot summer may have caused deformities to occur. Cromapol requires no primer on most surfaces with the exception of asphalt or bitumen for which a coat of Cromar CP Primer available separately) is recommended. Gap or expansion joints greater than 3mm must be covered using Glass-Fibre scrim and Cromapol. This must be carried out prior to full coating.

These application instructions are for guidance only and do not constitute any warranty of product performance. All moss and lichen must be removed using Cromar’s Moss & Mould remover, ensuring all corners and gutters are clean and free from plant growth.Cromapol will tolerate damp surfaces although as with any application for best results Cromar recommend applying to a dry surface. Cromapol roof coating is a liquid resin with a high level of fibres. It is the concentration of fibres that bridges the gaps in roofing, preventing water from getting through and causing issues. The excellent adhesion of Cromapol means only one coat is required to achieve an impermeable waterproof layer. Even if it’s wet outside, Cromapol won’t wash off. One Layer Application Cromapol Acrylic Waterproofing Roof Coating is known for its durability and longevity. The exact duration of its effectiveness can vary depending on factors such as the application, environmental conditions, and maintenance. Typically, Cromapol has a lifespan of 10 years or more. Due to the high level of fibres in Cromapol, this coating will bridge small gaps and fissures and requires only one coat to provide instant waterproofing. The unique formula provides instant protection from nightmare leaks. This is due to the formula not washing off as it cures, whether you’re dealing with strong winds or a light downpour.

Under optimal storage conditions in sealed original containers, our product maintains its quality for a period of 12 months. Cromar strongly recommends inspecting the surface and carrying out adhesion tests to any existing coating or substrate prior to the application. Application: Flat and Pitched Roofs, Roof Lights, Flashings, Fibre Cement Sheeting, Gutters, Slate, Asphalt, Lead, Metal and Roofing FeltCromapol is a fibre reinforced liquid acrylic resin dispersed in solvent, and is designed to prevent the incress of water. Application is simple, ensure all surfaces are free from loose debris, and gaps that are larger than 3mm are covered using Scrim Tape and Cromapol prior to full application. It can then be applied by a roller or a brush. Due to the nature of the product brushes and rollers cannot be cleaned and should be disposed of. Coverage

Cromapol only demands a single coat to be effective, with 1kg – 2kg being necessary per square meter. This does not only reduce the labour involved, but also brings the cost of your entire project down.

Solseal Delivery Schedule

Ensure your roof is sealed up, watertight and resistant to leaks with our range of Cromapol acrylic roof coating here at Build & Plumb. Just one coat of Cromapol roof paint sealant promises immediate protection from leaks by creating a reinforced, fully flexible and impervious membrane. Cromapol acrylic roof coating is designed to hold up in all weathers and is unaffected by temperatures, ensuring your building is kept dry and leak-free throughout all seasons. Cromapol Roof Paint Sealant Cromapol is suitable forgeneral waterproofing and sealing of roofs, pitched surfaces & for sealing flashings