SOK Battery 100Ah 12V LiFePO4 Lithium Iron Phosphate Deep Cycle Battery,Perfect for Your RV or Any Off-Grid Applications,Low Temperature Disconnected.

Product Information

If you can, we recommend setting the equalization voltage to 14.6v. With this set at 14.6, if an equalization is somehow triggered, you will not damage your battery. Victron Settings For SmartShunt & BMV-712 / SOK Battery Plug in the RS232 programming cable. Make certain that the cable is fully inserted into the RS232 port. Product not stored in adherence to the Manufacturer’s storage guidelines, including storage of the Product at low state-of-charge. Li Time has sold tens of thousands of batteries with very low failure rate. Compare this to more expensive lifepo4 batteries that have BMS failures and other issues. The cell voltage differential on their cells is lower than batteries that cost 2X as much in my testing. Experience reliable and long-lasting power with the SOK 12V 206Ah Battery. It’s designed to exceed expectations and deliver exceptional performance for all your power needs. User-Servicable Design

We thank you for the continued use of Current Connected, LLC. as your resource, and we hope this Training Manual will better assist you in understanding your project and enable you to meet your goals. Printing

Do I need to register for the extended warranty?

Experience reliable and long-lasting power with the SOK 12V 100Ah Lithium-Iron Phosphate (LiFePO4) Deep Cycle Battery. It’s designed to exceed expectations and deliver unparalleled performance for all your power needs. Whether you’re embracing the freedom of van life, enjoying the comforts of an RV, or powering your off-grid cabin, this battery is your dependable energy companion. Don’t settle for less when you can have exceptional value with an SOK Battery! Capacity and Voltage In a stationary application, the SOK 48v battery can be installed in any orientation with the exception of upside down, as viewed from the front panel. This means installation on-end, sideways or even face down would be perfectly acceptable. Battery Orientation – Mobile Application

Not every charger allows you to dial in the exact voltage you need. Some only allow for coarse adjustment via DIP switches, as an example.The difference is, we are nimble enough to provide excellent customer support, extended warranty (beyond what SOK offers) and, we have a phone number [(725) 258-2700], you can ring us and talk to a real person that speaks English. We ensure you are taken care of regardless of the circumstance. What is the warranty policy, and how do I get any problems with the product fixed? SOK models have a temperature performance of (-22~140°F) for discharges and (32~140°F) for charges and a BMS Low/High-temperature cut-off of 32°F/149°F respectively. On the other hand, Lion batteries have an operating temperature range of (32~113°F) for charges and a range of (-4~131°F) for discharges.

Thorougly inspect the system for any miswiring (loose connections, short circuits, reverse polarity) and correct any issues before proceedingThe lowest safe storage temperature is -22°F, so any temperatures below this, you should bring them inside or add a heating pad of some sort, but keep in mind if a heating pad runs out of power and the battery falls below -22°F, damage may occur. If you wish to make your own cable, use our pinout table which creates a cable that is bidirectional, meaning either end can be plugged into the Cerbo-GX or the battery while still preserving full functionality. When using the previous table or competitor’s cables, it will require certain ends be plugged into their corresponding devices. Connector #1

Safely eject the SD card from your computer and insert it MicroSD port on the underside of the Raspberry Pi. MicroUSB adapter to provide power to the Pi. Alternatively you can use a 5v power supply. Refer to your Pi documentation for power requirements The SK48v100 has been tested by Intertek Laboratories and has been certified to conform to UL 1973 standards. Ensure all batteries are in the “BMS-OFF” state prior to installing the cable(s) as explained in the shutdown procedure. After the cable(s) have been installed, power up the system per the proper pre-charge procedure. If the battery is not detected by the Cerbo: When compared to AC wiring, Low-voltage DC systems are very susceptible to voltage drop. Long cable runs between batteries and inverters can lead to premature low-voltage shutdown when heavy loads are turned on. For optimal performance, keep your batteries as close to your inverter/charge controllers as possible. Temperature

Can I use my old Lead-Acid Charger?

UL 9540 is a safety standard for an energy storage system (ESS) and equipment intended for connection to a local utility grid or standalone application. It designates key issues associated with ESS. UL9540 certification is currently in progress. The time for completion is not currently set in stone, but is targeted for mid 2023. UL 9540A (Fire) certification The float voltage is not actually a charging voltage; it is a voltage that can be provided by a charger that matches the resting full-charge voltage of the battery. Some chargers allow float to be disabled, however we do not recommend doing so. By leaving float enabled and set at the recommended voltage, the charger (whether solar or grid) will provide the power to loads FIRST, and the battery will make up for any additional current demanded by the loads. These batteries have a 7 year manufacturer warranty with an additional 3 years provided by Current Connected for a total of 10 years. If you ever have any issues with the product, please call us. Our team is on standby ready to help you. Our business relies on happy customers with working solutions, so if the battery is not working for you it is our job to provide the necessary after-sales support to turn a product into a solution. We have the faith and have done the testing to know these batteries will last a long time, and we are here for you through the entire duration of ownership. Enhanced Safety Features: The built-in smart BMS provides comprehensive protection against overcharging, discharging, and short circuits. It also features low temperature charging protection, ensuring optimal performance even in extreme conditions. As for most electronics, extreme humidity & condensation is not good for long term performance or integrity. Avoid environments that have condensing humidity and be especially cautious in locations near the ocean where salt spray may be present, as this can cause accelerated degradation that wouldn’t be covered by warranty. If a high humidity application is expected, install the batteries in a sealed / outdoor rated enclosure. Proximity to Equipment