About this deal
I noticed that the metal detector has an LCD display which indicates the battery condition and even the type of metal. This is where the transmit signal is generated and the receive signal is processed and converted into a target response.
The equipped shovel not only helps you dig detected objects, but can also be used as a corkscrew, cutting, compass and chise. If you have any complaints or unresolved sales-related questions, our dedicated support team is here to help. There is no direct link between the individual single frequencies shown in the diagram and the frequencies used in Multi-IQ. Detects live or dead electricity cables, metallic water pipes, nails and other metal objects and wood studs in partition walling which can be located without causing surface damage.Adjustable Backlit LCD Screen: The metal detector has a large adjustable backlit LCD screen, which can be read clearly even in low light conditions.
This enables maximum target sensitivity across all target types and sizes, while minimising ground noise (especially in saltwater). It starts with iron (low conductor) on the left, and then moves to the right into the mid conductors like 5c, aluminum, and pull tabs. Taking few minutes to read the instructions or watch our installation video, you can easily install and remove in 2 minute.
Setting the “disc” level higher will allow you to cherry pick some satisfying and enjoyable targets like copper pennies, dimes, and quarters. It picked up all the metals easily and has the ability to distinguish between different types of metals, which is a positive feedback from me. High-Precision Metal Detector] The metal detector provides 3 modes, including "PinPoint", "DISC", "NOTCH", which can accurately detect metals such as iron, aluminum, tin, copper, silver and gold. If the metal detector is set to reject unwanted targets then a target response will not be produced for those targets. Unlike the sensitivity or gain setting, I suggest you crank this up under the dime (10c) setting for the first couple hunts.
The above diagram demonstrates the typical sensitivity range of single frequency detectors, as compared with the full-spectrum sensitivity provided by Multi-IQ. Unwanted targets are generally ferrous (attracted to a magnet), such as nails, but can also be non-ferrous, such as bottle tops.Support headset function, the detector can be used without interference, even in a noisy environment . If the metal detector cannot identify the target: Sometimes, oxidized metals can cause the target to shift.