Clarke Paper / Cardboard Briquette Log Brick Maker

Product Information

It takes 3 or 4 coke hods full at a time and is very controllable from slow to very hot and fast burning. I did look into this, lots of YouTube videos and tutorials available, it looks like a very very messy job, you need to soak the shavings/paper/cardboard until it turns to mush then put it in the compressor and press the water out, then leave it to dry again.

See also our post on Heating your home with horse manure for a different way to use the briquette maker! Some of the best pallets we get are the ones that sheets of steel are delivered on, 6 or 7 pieces of 60 by 80mm timber up to 2.Our intuitive sign maker includes access to millions of graphic elements you can drag, drop, and customize. Once you have completed the pressing process, raise the leaver arm and place the top pressure plate above and out of the way. It's a lot easier to get hold of waste paper than pallets, unless you happen to be in a trade or location where scrap pallets are plentiful.

You can't put it on an already burning hot fire, you have to let it burn right down before refilling or you get flash back!To make the bricks, just soak and stir the paper in a bucket or trash can until mushy, scoop the pulp into the press, crush the handles down to squeeze out the excess water, leave the bricks to fully dry out, and then use as needed. You could slice some section off of a piece of 3" pipe to use as the rings if you can't be bothered to form rings out of bar.