We recommend you own a set of crimping pliers as well, such as these nice ones from Engineer - they're easier to use than trying to crimp with pliers. JST Corporate Profile and History". JST. Archived from the original on 27 November 2016 . Retrieved 13 June 2017.

The WC-240 is nice to use, but there’s not a lot to set it apart from generic tools for occasional use. I personally crimp a large amount of PH, hence the investment in the official tool. The JST-PH connector is used on many high current micro ESC and LiPo batteries - e.g. the E-flite Blade mCPX helicopter, the Spektrum AR6400LBL receiver and several Parkzone, E-Flite 'UMX' models. Note: Some 2.50 mm parts are incorrectly sold on the internet as 2.54mm (0.100in), and the 1.25mm parts as 1.27mm (0.050in). For more obscure types, no hand tool is offered, however JST do sell a hand frame (YRS-XXX) for mounting dies for their MKS-L applicator (used in the AP-K2N crimping machine), a very expensive solution, and the only option for production/mission critical applications. Unofficial / Generic

Choosing the Right JST Connector". DronesEtc. Archived from the original on 4 March 2016 . Retrieved 13 August 2015. EH is a 2.5mm pitch connector deployed in low cost products where a current carrying connector is needed, but PCB real-estate is highly constrained. They are significantly slimmer than XH connectors. Example part numbers See the top left female connector in this photo from Common JST Connector Types - PH (2.0mm pitch): JST connectors are electrical connectors manufactured to the design standards originally developed by J.S.T. Mfg. Co. (Japan Solderless Terminal). [1] JST manufactures numerous series (families) and pitches (pin-to-pin distance) of connectors. [2] [3] To minimize confusion, it is best to describe a connector using: the manufacturer's name, exact connector series, and optionally the pitch, such as "JST-XH" or "JST-XH-2.50mm" or "2.50mm JST XH-series" or other variations.

Very similar to the above series, however in a dual row configuration. Commonly used in LCD / LVDS applications. GH (1.25mm pitch) VH is a larger type of JST connector featuring positive latching and is generally used in high voltage and/or high current connections. Power supply connections in Japanese brand appliances is the most likely place to find them.surface mounting), insulation displacement (IDC), board to board, board to wire, wire to wire, LED, waterproof, pitch from 0.1 to 13mm, hand tools, semi-automatic presses and applicators for all our a b "List of JST connector series; JST". Archived from the original on 2020-11-12 . Retrieved 2013-08-31. This connector is also available in a surface mount configuration. Its housing is made of heat resistant resin so that it is not adversely affected during reflow soldering. Because of its tiny size and ability to be surface mounted, this connector meets the demand for high-density mounting of components inside electronic products. The term "JST" is sometimes incorrectly used as a vernacular term meaning any small white electrical connector mounted on PCBs.