Now, the next axis is called U, and basically it’s an uncommitted control system which allows you to drive a stepper motor, Lightburn is a software application that is used to design, edit, and control laser cutters. It offers a user-friendly interface and a range of tools and features that make it easier to create and execute laser-cutting projects. Some of the key features of Lightburn include support for multiple file formats, real-time laser preview, grayscale and vector cutting, camera integration, and more. PC-USB is a USB-BM interface. The controller may communicate with PC by this port. Ethernet Interface All outputs are isolated through the optocoupler, and 500mA current for each, OC gate output, each can directly drive the 6V/24V relay, led lamp, buzzer etc.

Running Status: To display the current status of the machine, such as Idle, Run, Pause, Finish, etc.; Basically, just like you do on your spark plug for your car, in a slightly more sophisticated manner.

Well, that’s because you can easily miss what these LEDs are, because right down the center of the box, Ruida Controller is a series of motion control systems used in laser engraving and cutting machines. It provides high-speed and precise control of the laser head for cutting and engraving various materials such as wood, acrylic, leather, and metal. The Ruida controller is known for its reliability and ease of use, and it is compatible with several software programs such as RDWorks, LaserCut, and LightBurn. Need more overshotting or larger acceleration (grammatical error intended) - Like the NOT ENOUGH EXTEND SPACE error, t his error occurs when the design is too close to an edge of the bed . This error message refers to Overscanning or Overshoot. When the laser is engraving, it may require extra space on the sides to get up to speed before the engraving starts, and to slow down and reverse after the engraving is finished. If the design is too close to the sides of the machine, the overshoot distance may result in crashing the machine. Increasing the acceleration or reducing the speed will both reduce the amount of overshoot space required. Depending on the design, the error may not always occur immediately. If the laser controller believes that the motor driver is looking for the leading edge signal (when it transitions from low to high), it will pulse the line, and could change the direction line immediately after that. If the motor driver is waiting for the falling edge, it will see the direction change BEFORE the falling edge of the pulse, meaning that it will change direction one step too soon.

Two-way independent digital/analog interface, the software can be adjusted respectively, convenient for double laser heads control; Dedicated RF laser control interface Scope: it means the farthest distance that the motion axle can move, which is determined in accordance with the actual condition of the machine. The RDC6442S software is compatible with several software programs such as RDWorks, LaserCut, and LightBurn. These software programs provide users with a user-friendly interface for designing and executing laser jobs.because we need the alternating supply inside the power supply to generate incredibly high voltages. Overall, it is important to choose a controller that offers a good balance between functionality and ease of use, and that will help you get the most out of your laser-cutting machine. LightBurn is a third-party software program that is compatible with Ruida controllers. It provides users with a modern and intuitive interface for designing and executing laser jobs. It also has advanced features such as camera alignment and automatic job optimization. Firmware Upgrade Laserscript CO2 machines are now supplied with Ruida controllers. RDWorks is the standard software which is supplied free of charge. However, the controller is also compatible with Lightburn (available on request at a small additional cost).