Assessment of in-hospital walking velocity and level of assistance in a powered exoskeleton in persons with spinal cord injury[J]. Topics in Spinal Cord Injury Rehabilitation, 2015, 21(2): 100–109. Development of a metabolic equation for the NuStep recumbent stepper in older adults[J]. Percept Mot Skills, 2011, 112(1): 183–192. Hybrid assistive limb exoskeleton HAL in the rehabilitation of chronic spinal cord injury: Proof of concept: The results in 21 patients[J]. World Neurosurgery, 2018, 110: 73–78.

Lokomat下肢康复机器人属于悬挂减重站立式机器人，由下肢步态矫正驱动装置、智能减重系统、医用训练跑台及控制系统和软件等组成. 下肢步态矫正驱动装置连接在一个弹簧支撑的四边形结构上，是训练系统的核心部分，在患者双侧髋、膝关节分别配备一个驱动模块，由电机驱动一套丝杠螺母机构带动髋、膝关节在矢状面内旋转，从而推动机械腿完成步行动作 [ 28]. 由于不同人的下肢存在差异，所以需要机械腿可以根据使用者自身的特征调节结构参数. 使得调节后的机械腿在训练过程中可以与使用者的下肢关节有良好的配合，以此保障训练过程的舒适性. 而智能减重系统是通过固定支架来支撑和稳定的，并且把支撑患者部分体重的绑带悬吊在他的胸前. 通过智能动态低惯性减重单元为不同体重的患者提供合适的减重训练方案，并使身体重心随运动上下浮动. 减重绑带与步态驱动器连接，减小步态驱动器对患者的压力负担. 医用训练跑台的主要作用有部分体重支持和正常生理模式的步态训练. 它主要与下肢步态矫正驱动装置一起进行协调运动. 控制系统和软件是实现机器人运动控制策略的控制中心，保证步态驱动装置、智能减重系统和医用训练跑台的协调工作，提供实时监测、远程遥控、评价反馈、紧急停止和情景互动等功能. Ready to experience the convenience and reliability of Indigo? Give us a call now at 01268 768 768. Our friendly team is standing by to assist you and provide you with a personalized solution that suits your business needs. Bernhardt M, Frey M, Colombo G, et al. Hybrid force-position control yields cooperative behavior of the rehabilitation robot LOKOMAT[C]//International Conference on Rehabilitation Robotics. Piscataway, NJ, USA: IEEE, 2005: 536-539. Clinical application of the hybrid assistive limb (HAL) for gait training-a systematic review[J]. Frontiers in Systems Neuroscience, 2015, 9(48): 48. Mukul T, Alberto E, Jorge B. Differentiating ability in users of the ReWalk TM powered exoskeleton: An analysis of walking kinematics[C]//2013 IEEE 13th International Conference on Rehabilitation Robotics (ICORR). Piscataway, NJ, USA: IEEE, 2013: 1-5.Indego S+, 350/400, M+ and M 700 have an on/off switch on the rear of the mower. Other Indego models are being switched off by removing the red isolator key under the mower, between the rear wheels.

Research progress on compliant characteristics of lower extremity exoskeleton robots[J]. Journal of Biomedical Engineering, 2019, 36(1): 163–169. Store your Indego in dry place out of reach of children and within a temperature range of -20°C and 50°C. Every year, 55.9 million people suffer from acquired brain injury, 15 million suffer from stroke, up to 500,000 people suffer from SCI, and 2.8 million people live with MS. Many of these people are left with limited mobility or some form of paralysis. This can be a devastating diagnosis that is completely life-changing for both patients and their families. How quiet is 63 dB? Sources say it’s comparable to a normal conversation sound levels (around 60 dB). A regular motorized push mower sound levels are around 90 dB and can go up to 110 dB. Instead of that, now you can start relaxing during the weekends as the mower does the work for you without damaging your hearing. You can read more here: “ How Loud Are Robot Mowers?” ReWalk下肢康复外骨骼机器人可以协助下肢瘫痪患者站立，行走，转弯和上下楼梯. 启动时，ReWalk使用倾角传感器与患者穿戴的腕带检测上肢的前倾，以微调重心位置的方式加以控制 [ 38]，通过电机驱动使机械腿按照预设模式模仿人体正常步态，以合适的速度辅助患者运动. 由于ReWalk采用机器主动控制，系统的动作不随人的意愿而改变，是一种被动的训练模式. 2014年ReWalk作为美国第一款外骨骼机器人获得FDA(food and drug administration)认证的个人应用许可，在美国、加拿大和欧洲等地区得到广泛的使用.This will decrease electric energy consumption even further. It’s basically a sleep mode. The way it works is it automatically stops powering the perimeter wire when the mower is not charging or mowing. Say for example when the job is done and is not scheduled to work again any time soon, but the battery is already charged fully, the energy saving mode becomes active. You can wake the mower up by simply giving it a mowing instruction manually (e.g “Mow now”), it also wakes up by itself when it’s just time to work again as per the schedule. Price Beater Guarantee: We're committed to offering you the best value for your money. If you find a lower price elsewhere, let us know, and we'll beat it! It might not be for you if your garden layout was very complex and/or consisted of more than 3 larger zones or the slopes were steeper than 27% (or 15°) and you wanted cut height to be less than 30 mm (1.18″) or more than 50 mm ( 1.97″ ). Apart from the higher price and no remote control, I don’t really see a reason against going with this one – it gets the job done.