Clearwater CH0018 Lay-Z-Spa Chemical Starter Kit for Hot Tub and Spa Water Treatment (Includes Chlorine, pH Minus, pH Plus, Foam Remover and Test Strips)

Product Information

Parts per million (ppm) is how chlorine is measured in. On average, chlorine levels should be between 1.5 and 3.0 ppm. 2. pH Minus Consider using clearwater hot tub chemical starter kits to increase the pH level. In that case, using pH plus comes in handy. Add two teaspoons per 1000 gallon water. Use a jug to dissolve warm water and distribute evenly throughout the tub water. Leave for a minimum of 2 hours and then retest the water to ensure that the pH level is between 7.2-7.6. Add more if needed. This Kit contains all the chemicals required to set up and run your system safely. Ideal for a hot tub novice who feels daunted by the chemical requirements, these kits are designed to make your introduction to the world of hot-tubbing as painless and simple as possible. For some who get used to swimming at an early age in swimming pools, the smell of Chlorine becomes natural, and for others, it always remains a problem.

To keep your spa water clean with the perfect balance, you need to have knowledge about different spa chemicals and do regular spa water testing to ensure the balance is safe for you to soak in.Hot tub chemicals might sound complicated. But, in reality, getting the chemical balance right in your hot tub, and then maintaining it, really isn't as daunting a task as many assume. If this is all new to you, our Lay-Z-Spa Chemical Maintenance Guide is the perfect place to get started after you've finished reading this article. Remember these chemicals for swimming pools and hot tubs are toxic so always store hot tub chemicals safely away from children and pets It is easy to apply, and the instructions on the kit are simple and easy to follow. The kit includes: 1. Chlorine Acid can cause the surface and equipment to wear away and reduce your ability to control total alkalinity. The acidic water can cause harm to you and your family members’ health. In most cases, getting a hot tub is just the start of a long, complex and continuous learning process on how to maintainthe hot tub so that it keeps providing you with an excellent and worthwhile experience.

Below are the 3 essential hot tub chemicals you need to treat and balance the chemistry of the water in your Lay-Z-Spa. Test strips indicate the levels of chlorine, pH and Alkalinity, so these are your 3 go-to essentials. Add 50ml of foam remover directly to the tub water. Please ensure that the ventilation system is running while you’re applying the foam remover. It will help distribute the formula within the spa water. 5. Dip Test Strips The award-winning Clearwater® Hot Tub Chemical Starter Kit is a fantastic option for new inflatable hot tub owners and is an easy-to-understand introduction to the world of water treatment.You should do a few things before filling your hot tub with fresh water like adding various chemicals to balance your water and make it safe to bathe in. Also, it keeps your spa equipment safe because poorly balanced water leads to damage, scale and corrosion.

The hot tub chemical starter kit for clearwater is all you need to ensure that your water is safe and relaxing. This starter kit has won many awards and helps prepare your hot tub with clear and healthy water. Heavy usage of your hot tub can add a large amount of dirt to your tub, resulting in constantly poor pH levels. For starters, there is the hardware of the tub. Once you get through that phase, water management is done by using spa chemicals.

You may also like

First, test the pH and alkalinity level of the water. If one of these levels are imbalanced, you need to use the foam remover. Shake the bottle before using the foam remover. pH minus is used to decrease the pH level of the water. The pH minus is an effective way to keep your hot tub’s pH levels lower, reducing the alkalinity and producing a more relaxing bathing experience. It’s the best way to avoid itchy skin or stingy eyes. Remember total alkalinity can also affect your PH level so you may need to increase and decrease that too. Finally, use the foam remover to manage or prevent excess foam from the water. The test strips will help you balance the water levels and ensure the tub water is safe and hygienic.