The v2 32Y4C models support MACsec on ports 1-4 only at 10G/25G speeds (50G speed NOT available for ports 2 and 4) NEW IP SLA for Voice monitors quality of voice traffic using the UDP Jitter and UDP Jitter for VoIP tests

For use in the SFP ports of the 2530 Series Switches. (The J9853A, J9854A, J9855A, and J9856A models have 1G/10G SFP⁠+ ports that do not support these 100Mbps transceiver modules.) Right-size switches - Choose from compact 8-, 12-, 24-, and 48-port Ethernet switches with optional PoE and 10GbE uplinks built-in. Only supported for use in SFP⁠+ ports on JL658A. 100-FX is not supported for use in any SFP56 ports on other models. The 2930F Switch Series models with 1G/10G SFP⁠+ ports added support for this J9054C/J9054D 100FX transceiver. The J9054C/J9054D are supported in models with 1G SFP ports. ER (J9153A/D) transceivers are limited to a maximum of two transceivers per J9309A or J9538A modules when used in a 5400zl or 8200zl chassis.JL253A, JL254A, JL255A, JL256A, JL258A, JL259A, JL260A, JL261A, JL262A, JL263A, JL264A, JL557A, JL558A, JL559A

CAT 5e cable RJ45 to RJ45 1.2m (4ft) - Up to 1 Gigabit operation, Ethernet cable with (M) RJ45 connectors on each end

Premier Flex Multimode OM4 LC/LC Fiber Optic cable, 1.0m (3.28ft) long - Duplex zipcord graded index 50/125um multimode 'bendable' fiber optic cable with LC/MPO connectors on each end (Blue Color) - Optical performance: 4700MHz/km

PoE and PoE+ allocations support multiple methods (automatic, IEEE 802.3at dynamic, LLDP-MED fine grain, IEEE 802.3af device class, or user-specified) to allocate and manage PoE/PoE+ power for more efficient energy savings Flexible management - Innovative design supports cloud-based and on-premise management, CLI, and easy-to-use Web GUI with the same hardware, eliminating rip and replace of equipment as network management needs grow.

Documentation:

The 8360 32Y4C model requires configuration of interface groups only for ports 1-4 (as group number 1) to enable the use of 10G transceivers / DACs in the SFP28 ports (Interface Groups default to 25G speed). Ports 1-4 on the 8360 32Y4C model do not support 1G transceivers. EN 55022:2010/CISPR 22 Class A; FCC CFR 47 Part 15 Class A; VCCI Class A; ICES-003 Class A; CNS 13438 NEW IP multicast routing includes PIM Sparse and Dense modes to route IP multicast traffic (limited to 16 interfaces) Multimode OM3 LC/LC Fiber Optic cable, 30m (98.4ft) long - Duplex zipcord graded index 50/125um multimode fiber optic cable with LC connectors on each end (Aqua Color) - Optical performance: 2000MHz/km Virtual Switching Framework (VSF) virtualises up to four physical switches into one logical device for simpler, flatter, more agile networks.

X121 1Gb SFP RJ45 T transceiver - Small Form-factor Pluggable (SFP) Gigabit transceiver using 1000BaseT technology - Has one RJ45 1000BASE-T port - Requires Category 5 100-ohm UTP or STP cable or better Table 57: Compatibility for SFP copper transceiver modules. The specifications for Revision D transceiver products are the same as the specified Revision A, B, and C SKUs.Multimode OM3 LC/LC Fiber Optic cable, 15m (49.2ft) long - Duplex zipcord graded index 50/125um multimode fiber optic cable with LC connectors on each end (Aqua Color) - Optical performance: 2000MHz/km X242 10Gb SFP+ to SFP+ 1.0m (3.28ft) Direct Attach Copper Cable - 10 Gigabit Ethernet, 100 Ohm cable with Small Form-factor Pluggable Plus (SFP+) connectors permanently attached to each end