Polar Blast can be used at various dilutions depending on the density of foam desired. A good starting point is 100ml product to 500ml water in your foaming bottle. Adjust foam gun settings as required to increase or reduce foam. There is no benefit to building layers of Polar Seal. We would only recommend reapplication once water beading has ceased. We certainly do not recommend application more than once a month.

It is a coating designed specifically for use in a pressure washer. It is the coating element (third and final stage) of the three-stage Polar range process. It is preceded by the prewash – Polar Blast and shampoo - Polar Wash. Wax on, wax off! Don’t let all your hard work go to waste. Adding a layer of wax or polish to your car will help to fend off any nasties that could land on the paint, whilst protecting your car from UV rays. Use the Autoglym Polar Seal to give your car a protective, hydrophobic coating that will leave it looking glossy in no time. If your vehicle only has very light soiling and you are using in place of shampoo. Please rinse vehicle first before applying Polar Blast. You can either allow to dwell and rinse without agitation or agitate with a sponge or wash mitt prior to rinsing. As far as car shampoos go, the performance of Autoglym’s Polar Wash was good. It helped to effectively remove the remaining contaminants from the paintwork, ready for the next stage. Foam Levels (9/10)

Bilt-Hamber Touch-Less

Like any good pre-wash, when you rinse it off, the cleaning agents in the foam will have worked away at the grime and makes the subsequent task of washing easier and more successful. Windows are not much use if you can’t see out of them! Get your car windows gleaming with Autoglym’s Car Glass Polish; use inside and out for crystal clear, smear-free vision. Don’t forget to hose down your car for a final time when you’ve done all your soaping and rinsing, this will budge those last little bits of dirt and dust that gather in those hidden spots. Wheels Don’t assume that once your wheels look clean, then the job’s done, Autoglym recommends adding a Tyre Dressing to completely transform the sidewalls of your tyres.

Polar Blast is a snow foam that can be applied using a pressure washer or foam gun. It covers the vehicle in a rich blanket of foam that clings to paintwork to gently loosen dirt and heavy soiling prior to shampooing. This reduces the risk of scratches and swirl marks caused by a sponge or wash mitt moving over heavy contamination. Polar Blast can be used instead of a shampoo if the vehicle isn't heavily soiled, just ensure you rinse the vehicle with water first to remove the top layer of dirt.Polar Blast is used as a pre wash snow foam and produces a highly dense foam blanket to your vehicle to help maximise cling time and loosen dirt. I’ve got a million things going on. Yes, I want the car to look less abandoned, but I’m pretty keen to keep what’s left of the paint protected. To do it justice will take hours, possibly days, which I simply don’t have. So I want something that is reasonably swift but also low input. The less sponging, the better. I’m hoping the multi-stage approach will limit the physical effort I have to put in. Lasting Results