Start by marking the spot where the hole needs to be drilled. This lets you know where to position the tip of the drill bit. 2. Find the right angle. Drilling holes of the same size which are evenly spaced is quite a difficult job, even for professionals. However, using a shelf pin jig allows you to finish the job perfectly. The standard hole size that you will be able to make using a jig is 1/4 inches in diameter which is universally accepted. So, in almost all the jig options, you will find hole sizes of 1/4 inches mainly. However, if you wish to make larger holes, you might have to look for a specific shelf pin jig in the market. 3. Hole Spacing You can then start drilling into the workpiece, making sure to keep the drill at the proper angle. You could also use a press attachment to guide your drill when making holes at an angle. 3. When applying pressure…

Talking about its design and build quality, the template is transparent and comes with pretty clean markings mentioned as well. Moreover, the quality of the template is very satisfactory and feels very sturdy in hand. Speaking of this shelf pin jig here, it comes with an array of 15 holes, where all the holes are spaced by a distance of 25.4 mm and have a diameter of 1/4 inches. However, since there are two rows given on the template, the offset distance for the rows is 37mm and 64 mm respectively. My search for a better Pin Vise started with better drill bits, or at least a way to change bits without fully reconfiguring the whole Hobby Drill. Let’s get this out of the wat straight off the bat, you can use a Dremel or any rotary tool. They are absolutely great for a myriad of tasks, but they are overkill for drilling holes in miniatures. Unless you are incredibly precise, you are likely to slip and worse drill a hole in your hand. Looking at this shelf pin jig, it’s almost 6mm long, which is quite compact, hence, easy to store and handle. However, it also comes with an attachment that allows you to join two similar templates for larger projects.

Installing pinned tuners with a jig

In case you are a professional woodworker and want a high-end shelf pin jig for your workspace, EZ Align offers one of the best high-end jigs in the market for professionals. This holds up to 3.6mm drill bits making it perfect for 3.2mm PCB Drill Bits. 4. The Army Painter Drill

FILPIN is to be considered whenever core build-up is used and less than one half of a coronal tooth structure remaining. Bonding alone is not sufficient in many situations were minimal tooth structure is present. Pins provide anti-rotational benefit when a single post is used. The Citadel Drill is one of the most well-known hand drills in this community. It’s generally pretty good. It’s well built with a smooth turning motion. I don’t find the triangular-shaped handle the most comfortable, but that’s likely just a personal view as I’m used to a different type of handle. Citadel Hobby Drill If you ask the professionals out there, they will definitely recommend you KREG as it has a brilliant reputation in the market and is well-known for offering high-end woodworking tools. In our opinion, the KREG Shelf Pin Jig is the best option if you are looking for something reliable and compact. It offers a hole spacing of 32 mm and can be easily converted into a larger template by using a similar jig. Moreover, it has a brilliant build quality and comes with a 1 year warranty as well.This is my baby, I had this model for over 20 years and they still make them now. It is generally everything you want from a typical pin vice. Solid build, decent size and weight. smooth spinning motion. It comes with 2 two-sided collets. one is stored in the handle one is stored in the front. Modelcraft Pin Vise

The design of this shelf pin jig is quite unique as compared to other options as you can freely move the template and make holes at your convenience. Moreover, it even offers 37mm and 50mm offset choices so you can freely work on any size of cabinets or shelves. If the drill bit you are using is fairly small, keep the pressure light to keep from breaking or bending it. Starting with the design, the template comes with a transparent finish, so it’s easier for beginner users to work using this jig. In fact, the size of the template is quite decent as it offers about 11 holes of 1/4 inch diameter.Hardened-Steel Drill Guides Unlike thin and flexible guides, the hardened-steel drill guides of the Kreg Shelf Pin Jig ensure each and every hole you drill is perfectly straight and true. Size: In case you are a professional woodworker, you should go with a jig that offers you more holes. Otherwise, if you want to have a jig for casual use, you can even go with the compact ones as they are easy to store and handle. Although markings are not provided on the jig, it offers a 37mm offset from one side and a 50mm offset from the other side. Meanwhile, the spacing between two consecutive holes is 25.4 mm or 1 inch which is good enough. In fact, the size of each hole is 1/4 inches, so you won’t find any difficulty using any kind of hinges.