All of the pictures reveal to mount this with the tubes at the top. This causes air bubbles and kills the cooler causing the fans to run more difficult and temps to remain greater. If front mounting, televisions on the radiator must be at the bottom. Air rises to the top. After switching my temps are cooler and the fans stay quieter at medium loads. I have an H510 case, but the x63 does not precisely fit well. You need to really press it therein, however it will fit with a bit of elbow grease. Its simple to ingratiate televisions at the top, however your cooling/performance will suffer considerably. If you are planning on the screen dealing with right side up, one more thing to be conscious of is that unlike what the handbook says there are only 2 viable setup directions. It’s real that there is a method to rotate the image through the NZXT CAM software application however if it isn’t installed in one of the previously mentioned orientations then regrettably it wont be able to turn it to the appropriate orientation which appears like an odd constraint but it is what it is.

Kraken X73 RGB | Infinity Screen CPU Cooler - NZXT Kraken X73 RGB | Infinity Screen CPU Cooler - NZXT

Source: Rich Edmonds / Windows Central (Image credit: Source: Rich Edmonds / Windows Central) Who it's for Even though Z73 and X73 share so many characteristics, their cooling performance is another story entirely. At idle, the Z73 maintained a whole degree (11 degrees Celsius) lower compared with X73 at the same ambient temperature. A significant difference between their thermal performance can be seen more when both are subjected to a load. The Z73 recorded a whopping decrease to 42 degrees Celsius.

If you can't quite afford the Kraken Z73, the X73 is a worth runner-up for powerful PC builds.

Once whatever was connected I turned pc on to ensure everything was working then installed the CAM software. The software is intuitive and easy to utilize. The fan LED can by resolved separately however I simply opted for one color. There is likewise RGB lighting on the pump which can also be changed. The temps on idle are in between 30-33 degrees. Whilst gaming it’s generally 40-50 degrees however on certain CPU demanding games it does go higher. Tension testing on Aida 64 the temperatures were in between 65-70 degrees. Temperatures will vary depending on what CPU you have so my outcomes will likely be various to yours.

Kraken X | CPU Coolers | PC Components | Gaming PCs | NZXT Kraken X | CPU Coolers | PC Components | Gaming PCs | NZXT

Okay so the performance of this cpu cooler is good, however I was honestly expecting just a bit more cooling performance from this latest pump style however it fizzles by a non-insignificant amount. I previously utilized a Deepcool Castle EX which is also a 360mm radiator AIO and the distinction in not just temperature but also sound is definitely noticeable and is a bit disappointing for a AIO cooler at this cost point. The NZXT Kraken X73 and Z73 have a very similar configuration. In fact, it is too similar that you can assume that both liquid coolers perform identically also. However, that is not the case. At idle with an ambient temperature of 22 degrees, the Kraken X73 performs a little worse and scored 12 degrees Celsius. When the processor is subjected to a load in the same ambient temperature, the X73 records 46 degrees Celsius in temperature. likewise, ensure you plug the 4 pin port from the pump to the “AIO” or “PUMP” fan adapter on your mobo. these connectors will run at 100% power enabling your software (NZXT Cam, in this case) to control the pump speed. if your mobo does not have those fan adapters, you can utilize any other fan connector such as “CHA” or “CPU”, but if you do this make certain you set that adapters power in bios to full power or disable any speed control for that particular connector. again, this will permit the pump to get full power from the mobo, and NZXT Cam will manage the pump speed. A few essential tips when installing AIO coolers vertically, the radiator pipes must be on the bottom. if they’re on the top, you’re most likely to get some gurgling sounds from the pump as any trapped air bubbles might get drawn into the pipelines and create a gurgling sound. If you’re mounting the radiator to the top of the case, the position of the pipes does not matter, simply whatever works finest for your layout. Our main focus of this review is the new Kraken X73 RGB, as mentioned previously the only difference with these coolers compared to the originals is the new RGB fans. Gone are the Aer P 120mm units with interchangeable colour trims that came with the regular X-3 AIOs, and in are the new Aer RGB 2 fans with an opaque diffuser ring housing eight RGB LEDs.

First off installation is a little a trouble with this due to the additional connections that the little screen needs. For some this may end up being a dealbreaker because of the fact that it might not fit in some smaller sized type factor builds or even a Mid-tower ATX develop with all the RAM slots inhabited.