Used by several models of Le Maitre and Ultratec fog machines for remote control. [ citation needed]

I've been showing to friends and colleagues. All were impressed. Really will be handy with those last minute channel needs. Thanks, Dave" - David Koski (Ashtabula, OH) This section does not cite any sources. Please help improve this section by adding citations to reliable sources. Unsourced material may be challenged and removed. ( March 2022) ( Learn how and when to remove this template message) of merchantability, fitness for a particular purpose, title and non-infringement, and warranties that may ariseIts frequency response is remarkably flat across the mid-range with a slight lift around 10KHz. This gives it a transparent, open character that's capable of capturing the authentic voice of vocals, strings and even percussion. The bottom end has all the tell-tale rich warmth you'd expect from a large diaphragm condenser, and the TLM 102 doesn't muddy up when close miking.

The three-pin XLR connector is commonly used for DMX512, on lighting and related control equipment, [8] particularly at the budget / DJ end of the market. However, using three-pin XLR connectors for DMX512 is specifically prohibited by section 7.1.2 of the DMX512 standard. [9] Use of the three-pin XLR in this context firstly presents a risk of damage to the lighting equipment should an audio cable carrying 48-volt phantom power be accidentally connected. Mini XLR Mixer expands anything with an XLR input: portable pa, karaoke machine, DJ controller, mixer, acoustic combo amp, installed sound system, etcThe Software is licensed, not sold, to you by Music Tribe for use strictly in accordance with the terms McGuire, Sam; Pritts, Roy (2013). Audio Sampling: A Practical Guide. Taylor & Francis. p.49. ISBN 978-1136122620. Music Tribe IP Ltd is and shall remain the sole and exclusive owner of the Image. You will not delete, alter, or obfuscate any proprietary legends relating to the Image, and each use will be accompanied by the following attribution shown next to the Image: "Courtesy of Music Tribe IP Ltd.". Many other types of connectors using the XLR type shell exist, with various pin configurations. One is the now obsolete three-pin power pattern connector manufactured by ITT Cannon. You'll find them useful in the studio too for exuberant vocalists who like to scream and bawl into the mic. Dynamic mics are passive, which means they don't need phantom power.