Polyurethane Concrete Floor Sealer (5 Litre)

Product Information

Concrete floor sealers are used internally and externally on internal floors and garage floors. Concrete and cement sealant for increased protection against oil and greasestains and staining from water. The recommended products used to apply this product are in the description below and highlighted in Blue. This is a rough estimate and varies depending on the condition of the driveway and amount applied with each coat.

Adocure is a resin based curing agent that is a clear, low viscosity acrylic polymer solution. Mixed specifically to be used on freshly laid concrete. It forms a curing membrane while also acting as a hard-wearing sealer for the hardened concrete. Our internal solvent freeconcrete sealer is odour free and contains no harmful chemicals, it is totally inert and can be safely used around food storage and childrens play areas. Application of oursolvent concrete sealer will protect against penetration of fluids and create a stain resistant barrier. Choosing a concrete sealer can be quite a task given the number of different options available. In this guide we will go through the different types and their uses while giving some tips and recommendations. The job of a concrete sealer is to protect surfaces from water damage caused by freezing and thawing cycles, stains from dirt, deicing salts, oil and other contaminants, as well as many more. A good concrete sealer will keep your concrete structure looking great for many years and also increase its longevity. Make Sure Surface is 100% dry and free from any moisture or contaminants before application. Do not apply if there is any chance of rain.

Adomast Safecure Sealer is perfect for use on new and old concrete for both interior and exterior surfaces.

Topical concrete sealers form a coating over the top of the concrete surface acting as a barrier due to its strong adhesive characteristic. This coating protects the concrete from moisture, stains, corrosion and chemicals.Most polyurethanes are moisture intolerant until they cure, so they should not be applied to surfaces if any water is present. A chemical reaction will occur that results in foaming and bubbling. They also don't allow for moisture vapor to move out of the concrete, which could present problems on some exterior concrete surfaces, such as driveways. How to apply Concrete sealers maintain the look of the concrete by adding a protective weather-proof layer over the surface. But, over time, this may start to wear away and show signs of damage. If this is the case, a resurface of sealer can be easily applied to completely renew the look of the concrete. Different concrete sealers offer different types of protection and different looking finishes. The type that you choose should be based on your specific project and concrete protection needs. Browse our range of EN1504-2 Approved concrete sealer s and concrete sealant. Our concrete sealer is for the protection and repair of concrete structures ( Hydrophobic Impregnation). For all our sealer range full relevant technical data is available. Smartseal's concrete sealers are widely used as a concrete floor sealer for use in domestic and commercial environments.

This paint is SO easy to use. The primer looked a little flimsy at first glance, a little bit ‘meh’, but BOY does it do a good job! The paint stayed consistent to the bottom of the tin and went on wonderfully. You’ll NEED good weather and you’ll NEED a clean surface but if you’ve got both of those, all you’ll need to turn an ugly yard into a garden is these two products. Polyurethane Sealers for Concrete Use these high-build sealers to produce a very durable, chemical-resistant finish Discoloration of concrete can happen over time when exposed to the environment. Clear or coloured concrete sealer can offer the protection required to keep the aesthetic appeal of concrete surfaces. Beyond the two main types of concrete sealer, there are more sealers that do the job that are available as options.

Everest Trade Paints Concrete Sealer is a solvent-borne, polyurethane resin-based sealer with exceptional effectiveness, This sealer will provide a heavy-duty, long-lasting clear seal coating with a satin / wet look finish. With fast drying technology, Cemflow Sealer eliminates surface irregularities while also being low odour and protein free. Fully cured after just 48 hours at 20 degrees celsius. Its penetration comes about by solvent evaporation, Penetrating into the concrete to protect the surface from oil and water infiltration while also dustproofing the surface.

Polyurethane sealers require more care when applying compared with single-component sealers, such as acrylics. Avoid applying water-based polyurethanes with a garden-type pump-up sprayer, since they don't reach the level of pressure needed to achieve a thin, even spray pattern. Instead, use a low-volume, high-pressure airless sprayer. Polyurethanes can also be applied with a micro-fiber mop, using a push-and-pull motion to get thin, even coverage. The physical appearance of the concrete will also change along with its protective layer. Each topical concrete sealer will change the physical appearance of concrete in different ways. Most likely the sealer dries to a clear, shiny film and can be slippery when wet. Any item not in its original condition is damaged or missing parts for reasons not due to our error. For the best results with our external (ONLY) solvent based acrylic concrete sealant two coats should be applied. This can again be done by roller, brush or sprayer, but if applied by sprayer a chemical resistant model must be used and Smartseal cleaning fluid washed through the sprayer to ensure continued use.This product can be used internally (good ventilation required) and externally on domestic and industrial surfaces due to it's heavy-duty polyurethane resin base. If the concrete being sealed is internal or poorly ventilated we would recommend our solvent free concrete sealer. This is particular important if it is a public area and the propertycannot be left un-occupied whilst the strong odours from the solvents dissipates. Paintmaster concrete sealer is an air-drying, solvent-borne, polyurethane resin-based sealer which provides a durable sealer coat with a semi-gloss eggshell finish, this sealer can be used on interior and exterior concrete.