The Protimeter Survymaster features two displays that are synchronized, a digital LCD display supported by a colour-coded LED scale. In the red zone, moisture levels are excessive and too high. If sustained, high moisture levels will lead to decay When reading the damp measurement using the search mode, the scale runs from 0 to 999 WME. The higher the This mode measures sub surface moisture between 1-3cm beneath the surface so is also well suited to users who wish to test beneath finished surface such as tiles you to search for sub surface moisture problems behind finished surfaces such as tiles where the use of pin probes is not possible. When reading the damp measurement using the two pin mode (measure), the scale runs from 7% to 99% WMC

Deep wall probes establish the presence of moisture in wall cavity insulation, sub and surface structures Both the LCD display and coloured LEDs provide accurate readings for both modes of measuring. The LCD display will provide a digital reading of the moisture content to one decimal place whilst the LEDs provide a guide to the severity of the moisture reading. Two Pin Mode Readings When determining the sub-surface moisture readings, the surveyors can utilise a set of deep wall probes which connect to the Protimeter Surveymaster through the external auxiliary port. Hammer electrode – this heavy duty external probe is ideal for conducting frequent moisture measurements in softwood or occasional readings in hardwood. Whether you're looking for moisture in walls, hard wood or soft wood or various other building materials, Protimeter's powerful Surveymaster2 moisture meter will help you find it.Pin-type probes measure moisture in wood and other building materials (use provided wood species calibration chart for more precise readings) The search mode is used to assess the moisture level beneath the surface of solid walls and floors independently of surface conditions. Non-invasive pinless radio frequency finds moisture at depth where moisture is not always directly visible—up to 3/4 in (25.4 mm) below the surface.

moisture content, the higher the reading. Any reading which displays an LED in the red zone, is too damp. The Identify the extent of moisture damage, diagnose the cause of the problem and monitor changes in moisture levels When using the two pin measurement mode, all you need to do in most applications is lightly touch the pins to the material you're testing (there's no need to fully insert them into the material), minimising the level of damage. The meter detects the actual percent moisture content of wood (in % MC) and converts these results to a wood moisture equivalent (WME) when measuring concrete, dry wall and other building materials. This mode measures sub surface moisture between 1-3cm beneath the surface so is also well suited to users who wish to test beneath finished surface such as tiles you to search for sub surface moisture problems behind finished surfaces such as tiles where the use of pin probes is not possible. Condensation Indication The Protimeter Surveymaster features a digital LCD display supported by the Protimeters revolutionary colour display which is a collection of 60 LEDs divided into color-coded zones signify moisture readings of the material under investigation. The green, yellow, and red color-coded zones indicate the following:

What's Included?

The relative moisture level is shown on the digital display and its moisture condition is shown on the accompanying scale of color coded lights. This allows you to assess moisture levels for new or refurbishing activities and diagnose moisture-related problems in existing buildings. PRODUCT VIDEO Pin Probes Mode The Protimeter Surveymaster has an auxiliary port used for attaching external moisture probes that provide versatility for additional measuring applications (select from above if applicable): Measures moisture beneath the surface without drilling holes to a nominal depth of 0-20mm. Hold against the wall to allow a radio signal to penetrate the surface. This is the best method for assessing the moisture content beneath a tiled / covered surface. The relative moisture level of the material under investigation on a scale of 0-999.