Ubiquiti UniFi AC Mesh Pro
- Brand: Unbranded
Description
Surge protection should be used for all outdoor installations. We recommend that you use two Ethernet Surge Protectors, model ETH-SP, one near the UAP-AC-M-PRO and the other at the entry point to the building. The ETH-SP will absorb power surges and safely discharge them into the ground. In the early access store, we can also find the new Unifi 6 Mesh, which has the same design as the FlexHD and is likely going to replace the FlexHD in the near future. Read more about it in the outdoor section. UniFi In-Wall HD – UAP-IW-HD Boasting a weather resistent design, the Ubiquiti UniFi UAP-AC-PRO Access Point can be deployed indoors or outdoors, in wireless networks requiring maximum performance. The UniFi AC Pro can be powered using 802.3af PoE from a Ubiquiti UniFi switch or another 3rd party enterprise switch, or using the included PoE injector. Optimal Performance Curios about the WiFi 6 Performance of the new Unifi 6 Access Points? Read my full review of the new Unifi 6 Lite and 6 Long Range in this article, including performance tests.
The Main port is a Gigabit PoE port used to connect the power and should be connected to the LAN and DHCP server. Power can be provided by one of the following:
Enterprise 24 PoE
Ubiquiti offers a couple of UniFi access points that can be used outdoor. I have written a more detailed guide about the outdoor access points that you can find here. To keep all the UniFi ap comparisons in one overview I will also briefly mention them here.
Wireless Uplink functionality enables wireless connectivity between APs for extended range. One wired UniFi AP uplink supports up to four wireless downlinks on a single operating band, allowing wireless adoption of devices in their default state and real-time changes to network topology. For devices that support Plug & Play Mesh, this functionality is extended to allow multi-hop wireless uplink – so wirelessly uplinked APs can support uplink to other wirelessly uplinked APs. Guest Portal/Hotspot support The Mesh Pro has 3 dual-band antennas, making it capable of reaching higher speeds. But the 3 antennas make it also a good base station for your outdoor mesh network. With a mesh network is one radio used to talk to the other access point (creating a wireless bridge), and the other is used to connect to the clients. Dedicated hardware offload for QoS, Guest Control, and client management ensures high throughput and reduced latency. Unifi SDH – UAP-AC-SHDThe UniFi HD is designed for high-density environments, like a school or concert venue. The UniFi HD has two ethernet ports, where 1 port can be used to bridge to another access point or as an extra uplink.
- Fruugo ID: 258392218-563234582
- EAN: 764486781913
-
Sold by: Fruugo