Add more water: Add more water sparingly to help Joint-It flow into joints of the paving, working diagonally across the joints to ensure Joint-It has penetrated all joints of the paving. Driveway Jointing Mortar - High Strength Epoxy Resin Paving Grout - suitable for vehicle areas up 3.5 tonnes Add more water: Add more water sparingly to help JOINT-IT flow into joints of the paving, working diagonally across the joints to ensure JOINT-IT has penetrated all joints of the paving.

Follow-up with either our Supreme Colour Enhancer or Premium Sealer and you can be sure your patio or driveway is protected from the elements, and day-to-day spills, for 3-5 years. (Actual duration of product efficacy depends on local weather conditions).You need a hard and soft brush and use the mortar with water on a water-permeable surface to get the best result. Work In: Using a squeegee or street broom, spread it evenly. Work in so that it goes deep into the joints and is compacted. Heavy Traffic Pro Jointing Mortar - 2-Part Epoxy Resin Mortar System - suitable for vehicle areas up to 7.5 tonnes Joint-It Simple must be used on a permeable base. This is to allow water to drain through instead of logging on the top of your slabs. We recommend a 6:1 sand and cement base.

Joint-It Fine can only be used where there is a permeable base. If you are unsure if your base is permeable, run a hose for several minutes on the top of the paving. If the water drains through the joints after about 5 minutes, then the base is permeable. If the water logs on the top, then the base is not permeable. Joint-It Simple can be applied even when it’s raining or wet. Instead of waiting until the rainy months have passed to finish jointing a patio, use our paving grout to get the job done sooner. Joint-It Grey is the revolutionary NEW Paving Jointing Mortar for jointing paving slabs, cobbles & Natural Stone.A cancellation request by the consumer must be put in writing to [email protected] and received by the Company within the 7 working day period. Final Cleaning: Clean the surface carefully with a fine hair broom so that all Joint-It residue is removed. Always sweep diagonally across joint. Joints must be a minimum of 1/8 th” wide and 1” deep to apply Joint-It Simple. If the joints are smaller than this, we recommend using Joint-It Fine. Description Joint-It Simple 12.5KG Available In 4 Colours (select in the drop down menu) – new for this season! Preparation:- Make sure all joints are totally clear of any form of dirt, especially oil, grease and remove any loose debris/old jointing mortar or large particles.