Bosch Intuvia offer anything you want from an e-bike display. Also they don’t offer anything which isn’t necessary for your e-bike.

Your bike's Bosch motor system includes a Walk Assist mode. This mode provides a little bit of assistance to a person walking alongside and pushing the bike. So if eco mode is too powerful for yourself and you want to ride more like a regular bike. You can adjust it and get lower support from your Bosch electric bike mtoor. Bosch Nyon Map And GPS This article will explain how to use the Intuvia's controls and how to access different Intuvia display settings. What is the Bosch Intuvia display? Single-press this button to cycle through the Intuvia's trip statistics display modes. You can think of the " i" as standing for "information". 3. Reset ButtonI do wish that the display had a battery percentage readout or finer increments on the battery infographic (it just shows 5 bars, which is 20% steps), but at least there's a dynamic range menu that updates based on your level of assist and last mile of riding. Depending on the motor in use, you may have eMTB mode (which replaces Sport mode) for dynamic power output based more on torque... it offers 120% to 300% assist and requires less hand/button input while riding. I tested my iphone while I was using google maps and listening to some podcast. During start of my ride battery level was 52% and when I finished my half hour trip I had 79% battery. This is impressive considering I use two energy consuming apps meanwhile. Bosch displays such as Intuvia and Kiox have integrated battery inside. Those batteries let you operate your display when they are removed from the battery or your e-bike battery is removed. You won’t need to worry about full discharge if you don’t use your e-bike for short period of time. But if you are going to let your e-bike stay idle over 3 month period of time, this can over-discharge your display. So better turn on your e-bike for a while so your display’s battery will be charged. The new Bosch Smart Remote is designed to be fitted at manufacturer level into the top tube of the electric bike. This means this is not possible to retro-fit to existing models as the bicycle has to be manufactured to include the smart remote.

You are able to set-up how much motor support you want from each Pedal assist mode. And you can have several riding modes like that. So you can have very sporty ride mode and a casual one. And when you commute you can use casual ride mode that you setup.There is a small lithium-ion battery inside the Intuvia display. This battery draws power from your e-bike's main battery, but the battery still has a limited lifespan, and you may need to replace it after owning your bike for a couple of years. If you think your Intuvia display's battery needs to be replaced, please see your Tern dealer for help. What else should I know about the Intuvia? In addition, your GSD R14 is equipped with the RearStop Brake Light, which lights up whenever you press the brake levers. The RearStop Brake Light works whenever you turn your bike's motor system on, even if your front and rear lights are switched off. What do the buttons on the Intuvia controller do?